1991 Chevrolet S-10 Blazer Logo

Related Topics:

A
Anonymous Posted on Jul 02, 2014
Be the first to answer

Wheel barrings for 1991 chevy s 10 blazer - 1991 Chevrolet S-10 Blazer

Answer This Question

5 Related Answers

milespeed

  • 599 Answers
  • Posted on Nov 10, 2008

SOURCE: 1993 Chevy Blazer Oil Pressure

nothing ..normal low pressure at idle while hot ...but really should be thinking fresh oil change and filter soon..also what are the RPM's at idle hot in gear with A/C radio and other accessories running?

Ad

jimholden3

  • 495 Answers
  • Posted on Jul 27, 2009

SOURCE: need the fuse diagran fo chevy blazer s10 4wd 1991

go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

Anonymous

  • 1071 Answers
  • Posted on Aug 05, 2009

SOURCE: High Oil Pressure In My 1991 Chevy S-10 4.7 Blazer

gauge or sender may be faulty

Anonymous

  • 139 Answers
  • Posted on Sep 08, 2009

SOURCE: fuel pump pressure specs

The fuel pump specs are 14 psi. and 20 gallons an hour.

Anonymous

  • 2 Answers
  • Posted on Oct 30, 2009

SOURCE: 1998 chevy s-10 blazer. 4 wheel drive does not

try putting it in neutral while it's running with foot on the brake then push 4 hi or 4 lo it should switch over then. Had the same problem on my 98 blazer the other day.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

What is the original tire size for a 1991 chevy blazer? 2 wheel drive, 4.3 engine.
the original size is 205/75/15 i hope this helps
Read full answer
Feb 05, 2011 • 1991 Chevrolet S-10 Blazer
1helpful
1answer

Removing a starter from a 1991 chevy s-10 blazer 4x4 , 4.3L v6...
The starter is under the vehicle on the passenger side. The best way is to turn your wheels to the left so you can reach the top of the starter solenoid behind the passenger tire. First undo the nuts from the solenoid terminals, second loosen the bolts holding the bell housing for the flywheel and slide it over enough to make room, third undo the starter mounting bolts and the starter should come out easier. And just reverse the steps for installation.
Read full answer
Jan 07, 2011 • 1991 Chevrolet S-10 Blazer
1helpful
1answer

No Fuel To Throttle Body On A 1991 Chevy Blazer S-10, 4.3L
ok, well as for the relay, yes there is one in your under hood fuse box....or inside the drivers door...but if you don't hear the pump, fear the worst, it may be dead.....happens ALOT.....check and change the relay, about $10, then if nothing, time for a new pump.
Read full answer
Feb 15, 2010 • 1991 Chevrolet S-10 Blazer
6helpful
2answers

Fuel pump pressure specs
The fuel pump specs are 14 psi. and 20 gallons an hour.
Read full answer
Sep 08, 2009 • 1991 Chevrolet S-10 Blazer
0helpful
1answer

High Oil Pressure In My 1991 Chevy S-10 4.7 Blazer
gauge or sender may be faulty
Read full answer
Aug 05, 2009 • 1991 Chevrolet S-10 Blazer
0helpful
1answer

Need the fuse diagran fo chevy blazer s10 4wd 1991
go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!
Read full answer
Apr 10, 2009 • 1991 Chevrolet S-10 Blazer
0helpful
1answer

Colum shifter jammmed in Park and ignition will not turn off jam
sounds like your steering lock is messed up. there is a bar that slides up and down on top of the inside of the column just in front of the steering wheel. it may be stuck.. try rocking the wheel back and forth while doing the same with the key
Read full answer
Mar 28, 2009 • 1991 Chevrolet S-10 Blazer
0helpful
1answer

86 blazer front wheel barrings how to ??
Hi there. If by gears you mean the splines on the end of the half shaft, you need to seperate the lower ball joint, if not done already, put the splines in the hub first and then hook the new bearing hub up to the lower control(ball joint) with the shaft already in place.
Read full answer
Mar 02, 2009 • 1986 Chevrolet S-10 Blazer
0helpful
1answer

Steering coloum loose on 1991 chevy s10 blazer
they make a tool to push the plate down you can get at autozone
Read full answer
Oct 21, 2008 • 1991 Chevrolet S-10 Blazer
0helpful
1answer

Code 24
According to my Haynes manual code 24 is "Vehicle Speed Sensor". It says this fault should only occur when wheels are in motion. if it shows any other time disregard it. Also check the ECM and TPS. I have the Haynes manual #24070 check with Auto Zone. The best 20 dollars you can spend.
Read full answer
Aug 02, 2008 • 1991 Chevrolet S-10 Blazer
Not finding what you are looking for?

View Most Popular

1991 S-10 Blazer

  • Cars & Trucks

Related Question

What is the original tire size for a 1991 chevy blazer? 2 wheel drive, 4.3 engine.

  • 1991 Chevrolet S-10 Blazer

58 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to change a fuel pump in a 2000 chevy blazer

2000 Chevrolet Blazer

Dome lights won't turn off

1997 Chevrolet Blazer

My service stabletrack keeps come on how to fix that

2006 Chevrolet Blazer

What is the firing order

2001 Chevrolet Blazer

2000 chevy v-6 4.3 torque sequence and settings

2000 Chevrolet Blazer

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...