SOURCE: Engine light comes on - Code shows P0300 and then
OBD II 300 Random/Multiple Cylinder Misfire Detected
When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc. In this case we have either multiple cylinders misfiring, or the computer simply can't determine the specific cylinder, and as such we are left with the P0300 in computer memory.
Possible Causes:
Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect Fuel Pressure
EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues
SOURCE: 1996 dodge grand caravan
my manual says, 1 close doors, 2 place key in ignition & turn key between off and on position for a total of 4 times ending in the off position (do not start engine), 3 press driver side door lock button to lock doors, 4 you will hear chime when programming is completed
SOURCE: 2005 dodge grand caravan stalling when you put it
1 Inspect Carburetor Dirty and Improperly Functioning Carburetor. 2 Inspect Carburetor Incorrect Carburetor Adjustment. 3 Inspect Carburetor Worn, Faulty or Damaged Carburetor 1 Inspect Carburetor Worn, Faulty or Damaged Carburetor. 2 Inspect Mass Air Flow Sensor Damaged, Loose, or Faulty Mass Air Flow Sensor or Circuit
SOURCE: I have 1996 Dodge Gran Caravan, and it gives me
CODE 27 - Injector Control Circuit, output driver does not respond properly to the control signal
Code 27 MIL light options: OBDII
P0201 - Injector #1 Control Circuit
P0202 - Injector #2 Control Circuit
P0203 - Injector #3 Control Circuit
P0204 - Injector #4 Control Circuit
P0205 - Injector #5 Control Circuit
P0206 - Injector #6 Control Circuit
CODE 43 - Cylinder Misfire, or Ignition Primary Circuit
CODE $# MIL options: OBDII
P0300 - Multiple Cylinder Misfire
P0301 - Cylinder #1 Misfire
P0302 - Cylinder #2 Misfire
P0303 - Cylinder #3 Misfire
P0304 - Cylinder #4 Misfire
P0305 - Cylinder #5 Misfire
P0306 - Cylinder #6 Misfire
P0351 - Ignition Coil #1 Primary Circuit
P0352 - Ignition Coil #2 Primary Circuit
P0353 - Ignition Coil #3 Primary Circuit
SOURCE: what do fault codes 12, 21, and 55 mean on a 1996
Code 12 = unplug battery recently (allways appear this code)
Code 21 = O2 sensor (the way to solve is replace it)
Code 55 = finish test
Good luck (remember comment and rated this post).
110 views
Usually answered in minutes!
×