SOURCE: 2002 nissan xterra l/f seat belt locked up
Try spraying penetrating lubricant or graphite into it, wiggle and try. Spray inside and press the button and spray between the button and the housing. If this dosen't work you can try looking into the seat belt with a flash light and see if you can see anything moving compare with a belt that works properly. If not successful you will have to replace the seat belt assembly as they cannot be taken apart as they are a safety item and are replaced as an assembly.
SOURCE: Does my 2001 3.3L V6 EFI Nissan Xterra have a non
It's has a timing belt, also it's an interference engine, if belt goes bad it will bent valve's .
SOURCE: how hard is it to replace valve cover gaskets on a
if this is your first have someone with you in is a job and must be done correct way or you will have big proplems
Testimonial: "Very good advice. It is VERY hard to replace these valve cover gaskets. Dealer wanted 1,795. Got it done by a private mechanic for 550. Thanks"
SOURCE: Diagram available for 01 Nissan Xterra Knock Sensor location?
V6 3.3L The sensor is located underneath the air intake manifold on top
of the engine block. This should take an experienced mechanic about 3-4
hours to replace.
Fig. Engine compartment component locations
Hope this help (remember rated this free help) Good luck.
103 views
Usually answered in minutes!
×