Need fuse diagram for a 1998 ford econoline van

More likely it is that the switch is permanently closed circuit. Check it with a meter.

https://www.google.com/search?q=1993+ford+econoline+van+wiper+switch+wiring+diagram

..

Question edited for clarity.

Try these

https://portal-diagnostov.com/en/2020/04/11/instrument-cluster-ford-econoline-e150-1998-system-wiring-diagrams/

https://www.google.com/search?q=2000+e150+4.2+van+instrument+cluster+pinout

..

Shouldn't be but one fuse panel under dash on left side of steering column. Has a plastic cover and the diagram is on the back side of cover.

It is very common for the data link connector to not work if the cigarette lighter fuse is blown. These blow all the time due to people plugging defective equipment into them.

I cannot tell you which fuse it is, because you forgot to mention WHICH Econoline van you have...E-150, E-250, E-350, etc....Engine size would be nice too.

Try to look in this link: motorcraftservice.com_VEHICLE=E-150

Hope helps.

you might find the fuse diagram on the inside of the fuse box cover under the hood........hope this helps.....cheers

For the 1987 Ford Econoline Van:
Size Engine??
Engine Options (AC/No AC)??

Click on the following direct, Free Link. It has the Serpentine Belt Diagram for your 1987 Ford Econoline Van depending on your size Engine and Engine Options.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/econoline/1987_ford_econoline_drive_belt_routing_diagram.htm

Send me your email and I will give you the diagram. [email protected]

I have a 94 E350, and mine has 2 fuse boxes. One is under the steering column at the driver's seat, by the brake pedal. The other is under the hood, when you're facing the van it's just a little to the left and below the driver's side battery.

I have the 89-96 ford full size van chilton. I emailed scans of the fuse diagrams to [email protected]. The password is chilton. Go to asiamail.com, type in chilton for email address and chilton for password and click enter. Lem me know via that email if that was the wrong thing.

Ask at http://manualfox.com/schematic.htm