Where is the oil sensor switch located on a 2002 chrysler sebring sedan

SOURCE: code p1684 2002 chrysler

P1684 means the battery was disconnected within the last 50 key starts.

SOURCE: Crank sensor and camshaft sensor

The crank sensor is in the top of bell housing of the transmission towards the back of the engine compartment. The cam sensor is built into the distributor.

SOURCE: Where is the PCM located on a 2002 chrysler

The PCM (Powertrain Control Module) is the aluminum box with fins that is behind the left headlight and toward the engine a bit. It's about 12" long 6" high and 2" thick and runs lenghwise from front to back. The box right behind the headlight that is about 6x6x2 and runs side to side, is the TCM ( Transmission control Module).

SOURCE: oil sending unit on 2004 chrysler sebring V6

Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove

SOURCE: Where is the fuel filter located on a 2004 Chrysler Sebring Sedan

Some of the Sebrings have two filters(one is called a sock).The sock(which all sebrings have) is located in the fuel tank itself on the pump module.If this model is the JXI then the external filter is located on the belly of the car between the tank and drivers rear seat. I hope I could help!!!