Question about 1993 Ford F250

Open Question

Why won't my 1993 ford f250 running lights shut off unless I disconnect the battery?

How do I fix the problem?

Posted by Anonymous on

Ad

5 Suggested Answers

outdoorsman5

outdoorsman5

  • 631 Answers

SOURCE: 1993 Ford F250 engine quit

Yes that is possible. Did you try and hook up lines together that go into the valve to see if it would run. Also check to see if there is fuel to injectors.

Posted on Jul 28, 2009

Ad

starrface

  • 2309 Answers

SOURCE: 1979 ford f250 wont start unless i put gas in CARB

first of all you have no carb its fuel injected, at least you know you have spark, now do you have fuel pressure??, is the fuel pump working?/ if you have fuel and pressure then you have to check signal at the injectors, so if you have fuel pressure and a good injector pulse the next step is to check the injectors, this may require removal, good luck

Posted on Nov 16, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: I have a 1995 Ford F250 Powerstroke Hard Auto shifting

I had the same problem on my 95. The problem was the torque converter was not unlocking. It had to be replaced.

Posted on Apr 24, 2010

sscullys

Steve S

  • 984 Answers

SOURCE: were is fuse for trailer running lights ford f250 ...

Passenger Compartment Fuse Panel, Fuse # 38.

This is in the Owners Manual on page 209. If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

Also handy to search for keyword in the PDF version.

Posted on May 31, 2010

moodydoodad

Dwight Moody

  • 107 Answers

SOURCE: I have a 1989 Ford f250 extra cab 4x4 with a 462 I

Hi,

I think what you have going on is that you have a maladjusted or defective ignition switch.

Posted on Nov 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to reset computer on 1993 ford f250


Ford technical hotline told me to leave battery disconnected half an hour to reset but that didn't work. I left it overnight and it worked.

Once the defaults are restored the vehicle should be started and driven in a mixed fashion until at least full working temperature is reached.

Jul 02, 2016 | Ford Cars & Trucks

2 Answers

My 1993 Ford F250 driver side door will not shut unless I lift up on the door from the outside. Is it the door hinges that need replacing or what?


You may have to replace the hinges but most aftermarket suppliers have pin and bushing kits to repair your existing hinges. A phone call to your auto parts supplier can probably fix you up for a fraction of the price of new hinges.

When you go about fixing the door, an old bumper jack is the best tool to use, if you have one. It will support the end of the door while you remove hinges and make adjustments.Otherwise you will need a helper. BE SURE to mark the position of the hinges before you remove them so you can put them back on easily. If you don't mark them it can take a looooong time to get them adjusted properly. Hope this helps.

Aug 29, 2011 | 1993 Ford F250

1 Answer

The Alarm keeps going off , previous owner cut the horn wires so that part doesnt work but the lights just randomly start blinking and going on and off and cant cut it off. remote key chain is no longer...


The day time running light module on the back side of the front drivers fender likely needs to be replaced to fix your problem.Unplug it and the lights will work normally from the headlight switch but the day time running lights won,t work and also the high beam indicator light in the dash won,t come on when you switch to high beam but all the lights will work properly.You should replace the drl module as soon as you can but unplugging it will at least keep you from having to remove a battery cable.

Sep 17, 2010 | 1993 Dodge Dynasty

2 Answers

I have a 1993 ford 7.3 idi. fuel prob


it could be the expensive part,the injection pump,do research on it before changing it.

Sep 07, 2009 | 1993 Ford F250

1 Answer

1993 Ford F250 engine quit


Yes that is possible. Did you try and hook up lines together that go into the valve to see if it would run. Also check to see if there is fuel to injectors.

Jul 28, 2009 | 1993 Ford F250

1 Answer

1993 F250 5.8L wont idle correctly,runs bad and smokes of fuel


check to see if the ground wire from the battery to the engine is tight if the cable is loose it will cause the injectors to flood the egine

Jul 12, 2009 | 1993 Ford F250

1 Answer

Abs light wont go out


When u power up the vehicle ABS does a self test(light stays on a few seconds then cuts off) and if it see's a problem will shut off and illuminate the ABS lamp. It will also do a second test on iself when you reach a speed of around 12-15 mph,it will run the pump for a few seconds to check pressure and look at the speed sensors,if it see a problem here it will again shut down and illuminate the ABS light.
Now if the red brake lamp is on then it will shut down because it thinks you have a hydraulic concern and will not try and run ABS if this is the case.
If red brake lamp is on most likely if you have good brakes it is a problem with the float sensor in the master cylinder reservior,maybe its bad or just stuck,or just low on fluid.

Feb 12, 2009 | 1992 Ford F250

Not finding what you are looking for?
1993 Ford F250 Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

gerry bissi

Level 3 Expert

4388 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...