Question about 1996 Chevrolet Impala SS

Open Question

1996 ss impala turn signal problem

Why my 1996 ss impala turn signal and brake light don't work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

John P Schwantes Jr

  • 1509 Answers

SOURCE: 1996 Chev Silverado K3500 dually, no brake lights

The chevys with red brake lights and turn signals do two things and I've fixeds alot of them. Looking at the tail lights with the hazard flashers on. both sides flash with nothingeles on? Or are the hazards yellow? if they're red and the third eye does work the turn signal switch is possible problem but it doesn't let the blubs and the circuit boards in the taillights out as they can fail and do some really bad stories the wires for the brakes and the turns and the hazards are the same ones and if the turns look right and the hazards look right then the turn signal switch transmites the turn too as this doesn't work part of your story can't be true

Posted on Aug 19, 2009

Ad

Anonymous

  • 491 Answers

SOURCE: 2003 Impala Brake lights dont work

The brake lights are routed through the signal light switch.
Looks like that will be the next switch to replace and the problem.

Posted on Sep 07, 2009

Vitally Alcher

  • 1645 Answers

SOURCE: 2004 chevy 1500 brake lights not working

check fuse under hood, batery terminals coroded wire at harness if everything fails run a hot wire to rear brake line with an interuptor.
check the swich under the foot brake.
vitally

Posted on Sep 09, 2009

genisis98

  • 31 Answers

SOURCE: secondary fan on impala SS 1996 not operating. fan

The PCM controls these fans via certain sensor inputs, ( CTS ) and switches ( A/C compressor for instance ). When relays are removed, both relays sockets should show 12v constant ( battery voltage on "switch side" ). When the key is rolled on, there should be 12v appear in two more places, ("Coil side" ) the relays are then operated by a ground signal from the PCM. ( Powertrain Control Module ) You need a scan-tool to check for fan request, by the PCM. A/C compressor request, etc. If you have any DTC's then repairing them may well fix your problem, otherwise, you may have a faulty PCM.

Posted on Oct 24, 2009

lindsay836

lindsay836

  • 677 Answers

SOURCE: how to replace a turn signal light

Open hood. on top of headlight assembly you will find 2 small bolts. I believe a 10mm. socket should fit. Take the 2 bolts, out and remove complete assembly.

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake and tailgate sometimes works


Since tail lights are not part of the brake switch, I wouldn't think so. This sounds more like a bad fuse or some other fault. Do either of the turn signals work? Are the turn signals a part of the brake lights or are they independent?

Jul 07, 2013 | 1993 Jeep Grand Cherokee

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Right brake light works off and on. When I put on turn signal all lights on that side gop off in rear. This is on a 1962 impala ss


you have a bad ground for that tail light, trace the wires and see where the ground wire attatches to the body.

Sep 05, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

1996 impala ss - odometer light goes on and off - now it wont go on - would go in and out when when dimmer was moved. speedometer and odometer both worked and speeedometer still works - think is just the...


1996 impala ss - odometer light goes on and off - now it wont go on - would go in and out when when dimmer was moved. speedometer and odometer both worked and speeedometer still works - think is just the light?

Nov 08, 2010 | 1996 Chevrolet Impala SS

1 Answer

HOW TO CHANGE SERPENTINE BELT ON 96 IMPALA SS


Rotate the tensioner pully clockwise using a 13 mm 1/2" socket. (the tensioner pulley is the only one with a hex head bolt). Follow tthe routing guide inside your engine bay and replace the pulley. They can squeak from age even if they don't have any cracks.

Apr 11, 2010 | 1996 Chevrolet Impala SS

2 Answers

After car has reached operating temp, if I don?t move for a while the temp. will keep rising. I notice that the fans have not been coming on, but they do turn on when I turn on the A/C. Where is the...


on your car are two sensors one is an engine temp sensor the other is a coolant temp sensor
change the coolant temp sensor that is what goes bad most of the time when the water gets to 210 degrees the coolant temp turns on of that is working change the radiator fan relay

Mar 03, 2010 | 1996 Chevrolet Impala SS

1 Answer

Seems like the brake is locked and the car will not go into gear on my 1996 chevy impala ss


The linkage in the steering column, there is GM used 2 types there may be a bar that passes through a solenoid or a cable... they can be disabled but it will most likely take someone that knows the columns...spend the money and have it disabled unless you have a day or 2 to try it yourself...

Feb 28, 2010 | 1996 Chevrolet Impala SS

1 Answer

1996 chevrolet impala ss tail lights will not work with switch, they will turn on with the alarm. already replaced light switch


could be a wire crossed from the alarm system or a faulty switch use a test light to determine power to the switch itself and although it may not be the issue check and ensure all the fuses are good ...i do think at this point its a faulty light switch

Sep 09, 2009 | 1996 Chevrolet Impala SS

1 Answer

2003 Impala Brake lights dont work


The brake lights are routed through the signal light switch.
Looks like that will be the next switch to replace and the problem.

Sep 06, 2009 | 2003 Chevrolet Impala

Not finding what you are looking for?
1996 Chevrolet Impala SS Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85219 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...