1998 Toyota Corolla Logo

Related Topics:

A
Anonymous Posted on Jun 26, 2014
Be the first to answer

Toyota torque specifications

Flywheel torque cluth torque

Answer This Question

3 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 13, 2010

SOURCE: what are torque specifications for toyota 3a-u

70 ft/lbs

Ad
rohdd

jay kaye

  • 305 Answers
  • Posted on Feb 14, 2011

SOURCE: 89 toyota pickup torque specs. for flywheel and

Thoroughly clean the flywheel bolts. Coat the first 3 or 4 threads of each bolt with sealant. Install the flywheel, aligning the previously made marks. Install the bolts finger-tight.
Tighten the bolts in a crisscross pattern and in several passes to the correct tightness:

  • 22R/22R-E manual trans-80 ft. lbs. (108 Nm)
  • 14-20 ft-lb for the clutch cover and
  • 50 ft-lb for the transmission mounting bolts.
Since you have the flywheel off, be sure and inspect the rear main seal. Now might be a good time to replace it. Be sure the rear flange of the flywheel is clean before re-install.
Be sure to inspect or, better yet, replace the bronze pilot bushing. I f you don't know how to get it out leave a comment. J


Thanks for using FixYa - a 4 THUMBS rating and POSITIVE TESTIMONIAL is really appreciated for the FREE answering of your question.

Anonymous

  • 236 Answers
  • Posted on Aug 28, 2012

SOURCE: 1996 toyota tundra spec for flyweel

I`m sure that the manufacturer has one but trust me its not vital.get it good and tight with a ratchet and you`ll be good.I`ve done plenty in 26 years of full time work and never torqued 1

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need torque sequence and torque for flywheel and pressure plate for 2.6-l Isuzu 1991 pickup 4x4
  1. Flywheel: The torque specification for the flywheel bolts is typically around 80-85 lb-ft (108-115 Nm). It's crucial to tighten the bolts evenly in a crisscross pattern to ensure proper seating of the flywheel.
  2. Pressure Plate: The torque specification for the pressure plate bolts is usually in the range of 14-20 lb-ft (19-27 Nm). As with the flywheel bolts, it's essential to tighten the pressure plate bolts evenly and in a crisscross pattern to avoid warping or uneven pressure distribution.
It's important to consult the specific repair manual for your vehicle to ensure accurate torque specifications for your particular model and year, as torque values can vary between different engine configurations and manufacturers' recommendations. If you don't have access to the manual, you may want to consider contacting a reputable mechanic or the manufacturer for assistance.
Read full answer
Mar 02, 2024 • Isuzu Cars & Trucks
0helpful
1answer

Torque specifications of the flywheel bolts for toyota 2.7 vvti
Which Toyota vehicle is the engine from?

Knowing the year, make and model is needed to confirm the correct torque specs.
Read full answer
Feb 24, 2024 • Toyota Cars & Trucks
0helpful
1answer

I have nissan tiida 1.5 litre, i need torque settings for the flywheel
The torque specifications for the flywheel on a Nissan Tiida 1.5 litre can vary depending on the exact model and engine type. I would recommend consulting the factory service manual for your specific vehicle to find the correct torque specifications.

However, as a general guide, the flywheel bolt should be tightened to a torque specification of around 50-60 ft-lbs (67.9-81 Nm) using a torque wrench. It is important to check the service manual for the specific torque for your flywheel and make sure the bolts are tightened in the correct sequence and pattern.
Read full answer
Jan 16, 2023 • Nissan Cars & Trucks
0helpful
1answer

Tata Novus 3434 flywheel torque specs
  1. Tata Cummins 6BTAA engine:
    • Stage 1: 29 Nm (21 lb-ft)
    • Stage 2: 67 Nm (49 lb-ft)
    • Stage 3: 90 degrees
  2. Tata Novus V8 engine:
    • Stage 1: 85 Nm (63 lb-ft)
    • Stage 2: 110 Nm (81 lb-ft)
    • Stage 3: 70 degrees
Read full answer
Apr 29, 2022 • Tata Cars & Trucks
0helpful
1answer

Flywheel torque specifications for vw microbus 2.3
Flywheel torque? I think those may be single use stretch bolts. Torqued, then a specific fraction of a turn more, for FW to crankshaft. For FW to pressure plate, just torqued down.
Read full answer
Sep 19, 2019 • Cars & Trucks
0helpful
1answer

Torque setting for yaris t1
here you go an on line page with all your specs just write down the ones you need. off save page for off line viewing.
http://www.allwidewallpapers.com/2007-toyota-yaris-engine-specifications/MjAwNy10b3lvdGEteWFyaXMtZW5naW5lLXNwZWNpZmljYXRpb25z
Read full answer
Jun 22, 2016 • 2007 Toyota Yaris
0helpful
1answer

? looking the bolt tension specs for flywheel and clutch pressure plate for 4hf1 thank you

Torque Specification - National Truck Spares ' Parts

www.nationaltruckspares.com.au/Parts.aspx?ProductTypeID=8...
1073, 4BC2 tq, Isuzu, Torque Specification, KT26 TLD57 NKR57 NPR57 ... 1075, 4HF1Tq, Isuzu, Torque Specification, NKR66 NPR66, 92 - 03, 4HF1, 4334

Small Block Chevrolet V8 Engine Specs ' Torque Specs ...

boxwrench.net/specs/chevy_sb.htm
Flywheel (Clutch). Thread Locker, 60 ft-lbs. Clutch Pressure Plate, Thread Locker, 35 ft-lbs. Centerbolt. (Harmonic Damper). Engine Oil, 60 ft-lbs. Bellhousin
Read full answer
Nov 07, 2015 • Cars & Trucks
0helpful
1answer

Toyota 2c. I need cylinder head and flywheel Torque settings
Toyota 2c ...
USE NEW BOLTS...
Torque sequence:
You're driving a diesel single cylinder head engine. Engine head torque has to be done in specific order and stages if not can warp head or break bolts. Suggest you get torque sequence and torque specs from your Toyota dealer, they can give you correct answer. Don't trust answers on here, if you choose wrong specs. could end up messing up head.


Flywheel - Use a Sealer on bolt, Manual Transmission 88nm/65 ft lb... Auto Transmission 74nm/55 ft lb
Read full answer
Aug 06, 2014 • Cars & Trucks
0helpful
1answer

I WANT TO HAVE CYLINDER HEAD TIGHTENING TORQUE AND SEQUENCES :1. CYLINDER HEAD 2.MAIN BEARING 3.CONNECTING ROD 4.FLYWHEEL 5.PULLEY
Go to a auto parts store (Pep Boys, Auto Zone, Advance, O'Reilly's, etc. ...they all have vehicle specific manuals for sale that will have a section on torque values.
Read full answer
Dec 26, 2010 • 1995 Toyota Pickup
0helpful
1answer

Torque spec on 1987 ranger flywheel and cluth plate
15-24 ftlbs.

Source: Mitchell1
Read full answer
Mar 17, 2009 • 1987 Ford Ranger
Not finding what you are looking for?

View Most Popular

1998 Corolla

  • Cars & Trucks

Related Question

Need torque sequence and torque for flywheel and pressure plate for 2.6-l Isuzu 1991 pickup 4x4

  • Isuzu Cars & Trucks

42 views

Ask a Question

Usually answered in minutes!

Popular Questions

P0420 code on Toyota Corolla

2001 Toyota Corolla

Toyota Corolla Verso 2004 CD problem

2004 Toyota Corolla

Second fuse box location on my 2003 toyota corolla

2003 Toyota Corolla

Check engine light and trac off light on in toyota 2012

2012 Toyota Corolla L Sedan 1.8L...

Hood latch will not close

2003 Toyota Corolla

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 1998 Corolla Manual

1998 Corolla

Loading...