1996 Mitsubishi Mirage Logo

Related Topics:

A
Anonymous Posted on Jun 25, 2014
Be the first to answer

Seat belt light on 1996 mitsubishi mirage

Seat belt light is on.

Answer This Question

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers
  • Posted on Jan 31, 2009

SOURCE: rear strut removal

Check this link & scroll down to 1994-2000 models.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800382b2

Ad

Anonymous

  • 333 Answers
  • Posted on Sep 10, 2009

SOURCE: fix a stuck back seat seat belt 2006 mitsubishi

Most often the cause for the rear belts getting stuck is not an actual bad belt mechanism, but the belt simply getting folded over and retracted that way.

Try pulling the belt out as far as you can and inspect for the belt being folded. If this is the case, slowly work it back and forth trying to unfold it. It will take a while sometimes.

Anonymous

  • 4044 Answers
  • Posted on Sep 17, 2009

SOURCE: vibration felt in front floorboard

Yes it can but the dealer would have found it on the test drive if they test drove the vehicle. The only other causes for the vibration I can think of should have been found on inspection as well. Check your bushings and mounts for the sway bar and your tie rod ends as well.

Anonymous

  • 7353 Answers
  • Posted on Sep 24, 2009

SOURCE: 1999 Mitsubishi Mirage, how does one reset service reminder light

what does the light read??? I dont show a Maint required light for that model?

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Jan 12, 2010

SOURCE: DTC 27: DRIVER-SIDE SEAT BELT PRETENSIONER OPEN

wiggle the wires under the seat

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

I have a 2015 Mitsubishi Shogun.The battery was flat so had to be jump started.since then the seat belt warning light and chime won't go off even when the seat belt is fastened. please help!!
In seat belt there's a sensor that tells when seat belt is buckled. The sensor isn't registering that belt is buckled. Have belt system checked out by dealership should be still under warranty. Don't think it's connected to battery problem
Read full answer
Nov 18, 2017 • Mitsubishi Cars & Trucks
0helpful
1answer

Disable seat belt warning
use a seatbelt male connector off a wrecked car is the easiest way but dont know why you would want to disable the seat belt light as it is a safety warning device
Read full answer
Jul 22, 2014 • Mitsubishi Mirage Cars & Trucks
0helpful
2answers

How do i disconnect seatbelt chime mitsubishi mirage
On many cars, the seat belt sensor is also used to trigger the airbag. Investigate whether this is the case on your car before doing anything drastic to your seat belt alarm.Locate the wire under the driver seat that connects to the buckle with the release button. It should be towards the rear on the right hand side, where you plug the belt into.Follow the wire to an area under the seat where you will be able to fit your hands into.Look for two wires running together. Cut through both of them and slightly separate the ends apart.Use electrical tape to cover the wire ends so they do not short out on each other or metal under the seat.Tuck the wires away from the seat brackets so they do not get tangled if you move your seat.OR>>>>

On the side of the receptacle (where you would slide the buckle into) are two non-tamper torx screws.Remove the screws using a hollow T10 bit.Carefully remove the plastic side cover. It contains a spring loaded slide switch.Remove the small spring and slide the switch down to its lowermost position.You can double check by watching the seat belt light on the dash go out.Replace the plastic cover and screws.Store the small spring for use in the future. This way the system thinks the buckle is always in so the light and chime won't alert at all.
Read full answer
Jul 22, 2014 • 2014 Mitsubishi Mirage
0helpful
1answer

The rear double seat of my 2013 Mitsubishi Mirage won't raise after folding down due to not enough play in the middle seat belt. How can I release the seat belt to lift the seat again?
sorry but seat belt reel is jammed ,,,, find reel and prob will have to replace it ,,, dont play with safety belts or reels they are too important
Read full answer
Dec 01, 2013 • Cars & Trucks
0helpful
1answer

I had the bank and o2 sensors changed and disconnected the battery but engine and seat belt lights are still on. Why??
And the seat belt warning light and the check engine light are two different systems. The seat belt light means one of the seat belts is not fastened if someone is sitting in the seat, or the sensor for that seat has failed.
Read full answer
Aug 05, 2013 • 1996 Jeep Grand Cherokee
4helpful
3answers

95 mitsubishi mirage has fire wont start
check for fuel pressure should be around 45 to 55 psi there should be a valve on the fuel rail with a black plastic cap kinda looks like a bike tire valve u will need a fuel pressure gauge .
Read full answer
Jan 08, 2010 • 1995 Mitsubishi Mirage
3helpful
2answers

My SRS light is on continously. where do i go on
It's detecting that there's an issue with your air bags. I wouldn't recommend working on your air bag system unless you know absolutely what you're doing as you can accidentally set them off or cause them to not work at all
Read full answer
Aug 19, 2009 • 1996 Mitsubishi Mirage
1helpful
1answer

Srs light always on in my mitsubishi eclipse
Did you change the seat belt holder. When airbags are deployed the seat belts automaticly open they still work ok but need changed
Read full answer
Aug 07, 2009 • 1996 Eagle Talon
0helpful
1answer

Replace fuel pump 1990 mits mirage
no but you do need to remove the back seat to unplug the fuel level sending unit wires before dropping the tank.
Read full answer
Feb 28, 2009 • 1990 Mitsubishi Mirage Hatchback
0helpful
1answer

Srs light is on and lock seat belt,the car is a 2001 mirage,we bought it like that how do we fix it or where do we go.
Not to scare you, but having your airbag light on is usually a computer problem, and there have been cases of the airbag deploying for no good cause. I don't think you need a computer, but someone will have to hook up to your vehicle with a computer, and scan it. Also do a carfax check on that vin number. If the seat belt is locked, and the airbag (SRS) light is on, it sounds like the vehicle has been in an accident. I hope all goes well, and by all means, if any new info comes up, I would like to hear. Thanks.
Read full answer
Feb 22, 2009 • 1988 Mitsubishi Mirage
Not finding what you are looking for?

View Most Popular

1996 Mirage

  • Cars & Trucks

Related Question

I have a 2015 Mitsubishi Shogun.The battery was flat so had to be jump started.since then the seat belt warning light and chime won't go off even when the seat belt is fastened. please help!!

  • Mitsubishi Cars & Trucks

69 views

Ask a Question

Usually answered in minutes!

Popular Questions

Carburetor Tuning Mitsubish.

1992 Mitsubishi Mirage

Que significa SRS en el panel de mi mitsubishi mirage 1995

1995 Mitsubishi Mirage

How to change out flasher fuse

1995 Mitsubishi Mirage

MAP sensor output voltage too low?

1993 Mitsubishi Mirage

My 1994 Mitsubishi Lancer (4g15) engine stops

1994 Mitsubishi Mirage

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...