I put the same type of plugs in that came out it ran fine for and hour then chk engine light came on I put scanner on it and it read a misfire on cyl 6 I then took coil and moved it to cyl 5 cleared codes let run light came back on and read cyl 5 after that I changed the coil cleared codes and light came back on saying cyl 5 is a misfire can anyone help these coils aren't cheap 105.00 ea
SOURCE: 2004 Mitsumishi Endeavor
The front three should be easy enough. They are right in front of the intake plenum. (big black plastic looking thing on top of the engine. The back three are underneath the intake plenum. It seems like a lot to tackle but it is really not that bad.
As always, if you are not sure you have the skills to attempt this go to a qualified mechanic. I did mine in an afternoon.
SOURCE: My service engine soon light is on on my 2004 Mitsubishi Lancer.
You can't guess with this vehicle take it to Auto-Zone they will check the code for free and get back to me. Good Luck
SOURCE: tune up 2004 mitsubishi endeavor
you have to take the plenum off. the big plastic thing on top of the engine.
SOURCE: I have a 1998 mitsubishi eclipse rs and the check
YEP BAD COIL CLOGGED FUEL INJECTOR AND INTAKE LEAK TO CYLINDER 1.TRY CLEANING FUEL INJECTORS.IF STILL MISFIRE DO A COMPRESSION TEST TO THAT CYLINDER YOU COULD HAVE A MECHANICAL ISSUE.
132 views
Usually answered in minutes!
×