What's the order of serpintine belt 4.0 - 1997 Jeep Grand Cherokee

Most likely one of the things that the belt drives is frozen. Check that your water pump, power steering pump, alternator, etc all turn without the belt.

Here's a link on your belt diagram. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Here's another link showing the timing belt and the serpentine diagram. 2001 Hyundai Santa Fe Serpentine Belt Routing and Timing Belt Diagrams

Release the belt tensioner and the belt will virtually fall off the pulleys. Make a sketch of the route of the belt before you do that as it can become confusing when you try refit the new belt.

what engine? Please rate if it helps

3.L v6

Item Part Number Description 1 3A733 Power steering pump pulley 2 8620 Drive belt 3 2E884 A/C clutch pulley 4 6316 Crankshaft pulley 5 6B209 Drive belt tensioner 6 10344 Generator pulley


2.0L Zetec 4 cyl with A/C

Item Part Number Description 1 10344 Generator pulley 2 19A216 Belt idler pulley 3 3A733 Power steering pump pulley 4 6C301 Drive belt 5 2E884 A/C clutch pulley 6 6B320 Crankshaft pulley 7 8509 Water pump pulley 8 6A228 Drive belt tensioner

It would be helpful, but no special tools are required. Just look at what size bolt is on the Belt Tensioner, because that's where you will have to use a wrench to apply pressure in order to relieve pressure to take belt out. Good Luck.

Sorry for the delayed response. I am going back and answering unaswered questions. I do not know if you still need this information, however I am answering it in case you do.

Click on the following direct Link. It has several Diagrams for your Belts, based on your specific engine and options. These also include specific instructions on moving the Tensioner, in order for you to loosen and remove the Belt.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2004/make/ford/model/pickup/2004_ford_pickup_drive_belt_routing_diagram.htm

look around the wiring and sensors when belt broke some debris may have damaged or disconnected the circuit

what engine is in the car??

To replace the belt push (rotate) the belt tensioner and remove the belt. Use a 15mm socket on the 4-cyl. engines and a 3 / 4 in. open end wrench on the V6 engines.

change serpintine belt I had one that it made noise changed belt noise went away