SOURCE: how to change fog light bulb on 2004 jeep grand cherokee
There's a small space behind inside fender. You can get your hand in there to grab and twist the back of the bulb to release it. You need a flashlight.
SOURCE: how to change oil filter on 2008 jeep liberty 4x4 ?
yeah they will say that and it may be your last choice but I know it is in the front of the engine and you need a long extension and ratchet handle and a claw type filter wrench to get it. Worth investing in if your going to do it all the time yourself. but prob not for one time.
SOURCE: replacing tail light on Jeep Liberty
So you already have the screws out. You simply have to pull it out. It probably have a small plug or *** on the back side to help hold it in place. YOu can pull the unit fairly hard on it with out breaking it, just be firm with it and it should come right out. I'm not sure about the 3rd light, how it is mounted as well. Are you just changing the light bulb in it or changing the cover? If your just changing the bulb or cover you should just be able to take the screws out of the cover and use a small screwdriver to gnetly pry it off.
SOURCE: 2004 jeep liberty thermostat change?
ihave to change my thermostat in my 04 jeep liberty is it hard
SOURCE: 2005 jeep liberty brake lights will not work. I
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
435 views
Usually answered in minutes!
×