Torque culasse 3.7 jeep - 2002 Jeep Liberty

Head bolt pattern 4.0 - Jeep Cherokee Forum

https://www.cherokeeforum.com > head-bolt-pattern-4-...
Apr 12, 2017 - step 4...tighten all bolts except #11 to 110ft/lbs, then tighten #11 to 100ft/lbs... JeepingDan's Avatar.
Torque specs. for 4.0 cylinder head 2002 - Jeep Cherokee ...
Jun 23, 2017
cylinder head torque specs on 94 4.0 - Jeep Cherokee Forum
Sept 2, 2015
4.0 torque specs - Jeep Cherokee Forum
Apr 12, 2017
Cylinder Head Bolts & Torque - Jeep Cherokee Forum
Oct 1, 2019
More results from www.cherokeeforum.com

Videos as well.

https://www.google.com/search?q=torque+sequence+of+the+head+bolts+on+a+1999+Jeep+Cherokee+4.0

..

You should check out www.reliable-store.com they have info on repair, service, wiring diagram, electrical diagram, fuse diagram, torque specs, troubleshooting, PCV, gear box, owner's/service/repair/parts manual, fault codes, error codes, etc everything on all vehicles. must check it out

https://www.jkowners.com/forum/modified-jk-tech-dept/291905-3-8-waterpump-torque-specs.html

This site has the torque specs.

Look at this link for the torque specs.

https://www.jkowners.com/forum/modified-jk-tech-dept/291905-3-8-waterpump-torque-specs.html

Double posted, do we get 3, the record here is 25 posts.

Your transmission should still work if the solenoid goes bad. It will just shift funny

the 4th bolt back from the front on pasenger side is the #1 head bolt, tighten in a clockwise rotation. it is a 4 step process.torque all bolts to 22 ft lbs...step 2 torque all to 45 ft lbs...step 3 retorque all to 45 ft lbs...4th step torque bolts 1 through 10 to 110 ft lbs... bolt 11 to 100ft lbs then bolts 12 thru 14 at 110 ft lbs

 For your 1991 Jeep Cherokee 2WD 4.0L MFI :
  Foot pounds (Final torque) 

  Note:
  Torque sequence ------------------  
  front    | 12  8   4   1   5   9  13 | 
  of | | 
  engine | 11  7   3   2   6   10 14 | 
  ------------------  
Final torque must be reached in 3 equal steps  
  Step 1: torque all bolts (except bolt 11)  
  to 110 Ft/Lbs  
  Step 2: torque bolt 11 to 100 Ft/Lbs  
Recheck final torque in sequence