Gauges not working - 2005 Chrysler Town & Country

not 100 % sure but some of the gauges on the mini vans go through body module. scan it and see if there any codes logged before you change anything else.

None of my gauges will work, but my turn signal indicators ...

www.americanautowire.com/.../none-of-my-gauges-will-work-but-my-tu...

None of my gauges will work, but my turn signal indicators, high beam ... As we've discussed previously, anything electrical needs a 12 volt feed and ground to work. ... 09/28/2015 There are a number of new products coming in Nov/Dec this ...

my gauges quit working - CarGurus

www.cargurus.com > Questions > Ford > F-250 Super Duty

CarGurusSep 21, 2013 - my gauges quit working - My odometer, speedometer, fuel, tach, trip, and ... I tried fixing the wire and had the same problem....so I replaced the shift lever and everything is back to ... no gauges will work in dashboard 1 answer.

No dash gauges, but dash lights - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Dodge > Caravan ' Voyager

Feb 6, 2010 - The dash lights work fine, so does everything else. The dash gaugesjust don't work. This is something that has been an intermittent problem ...

Intermittent gauges usually mean a bad ground connection for the gauges. Things to check: look for multiple ground connections at one screw to chassis frame & tighten it; check large connector at rear of instrument cluster for good connection; replace gauges fuse - it can be cracked. If none of those work, than instrument cluster circuit board will probably have to be replaced - which means removing the cluster.

If none of the gauges work, you need to check the gauges fuse and the connector on the back of the cluster. Each gauge is grounded thru its own sending unit.

is it the lights of the gauges dont light up or the gauges dont work period? if they dont light up then check the bulbs that are behind the gauge cluster and they could be burnt out i have the flickering prob with my ac hvac controls and half the lights on my gauges dont light up due to bulbs being burnt out i just havent spent the money to get some blue leds to put in there

For gauges not working on dodge problem,troubleshooting. Click the link below :----http://technoanswers.blogspot.in/2012/02/dodge-neon-gauges-not-working.html
---------This will help.Thanks.

All the gauges work off the same circuit, so if the temp gauge is not working then all the gauges should be inop as well if the problem is the power to the gauges.

I think gauges for this year model are all mechanical. The problem may be either with the gauges, the sensors, or both the gauges and the sensors. Just buy a sensor for your vehicle's model and install it. If it still does not work then you must buy the gauge as well. However, buying a sensor+gauge set is slightly more expensive that just finding used parts. So I suggest, just buy used gauges and sensors to fit your vehicle. Another option is to buy after market gauges and sensors, they are slightly less expensive than brand new original ones but you will have gauges sticking out of your dash.

Here you go. Under hood fuse block
Ign. Fuse E
and
ipc/dic
both fuses are 10 amp
I hope this helps. Take care.

we had our gauges go out and you need to replace the circuit board (the gauges are all one piece and eazy to change your self) new it runs about 300-400 you can find them at a junk yard for about 75.