How do you replace the license plate bulb on a 2005 LIberty

SOURCE: changing license plate light

take out the 2 srews that hold the assembly in the hatch and remove it then 1/4 twist the socket to remove from lens assm.

SOURCE: 2005 jeep liberty brake lights will not work. I

brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.

SOURCE: 2005 Jeep Liberty Sport. Headlights. Passenger Side is dim

TEST
remove both bulbs from the lamps but leave them on their wires switch on and see if the bulbs are still different brightness if not they the passenger side lamp housing has damaged mirror is dirty or missalined and needs adjustment. if they are different brightness then this may be a earthing problem.

SOURCE: 2005 jeep liberty no parking lights front or

check the fuse in the fuse box : either under the dash, glove compartment. Also, check for any relays under the hood.

Please let me know if you need any further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

SOURCE: How do I replace a

1. Remove the screws that secure the license plate lamp assembly to the rear bumper fascia
2. Pull the license plate lamp assembly down and out through the mounting hole in the rear bumper fascia far enough to access and disconnect the wire harness connector.
3. Remove the license plate lamp assembly from the rear bumper fascia.