What is code 9301 on cl600 srs system
SOURCE: SRS LIGHT ON E320 MERCEDES 1999
sorry but your going to have to take it to the dealer to get that light reset.
SOURCE: Fault Code : P1664
P1664 FIP (Fuel Injection Pump) malfunction (possible air ingress in low pressure fuel side)
Most likey the Diesel fuel injection pump needs to be replaced or overhauled.
SOURCE: SRS Warning Light at red on my Mercedes Car What is the likely pr
Hey,
take a look at www.airbagmodul.com
They're working in Airbag-Simulators and Occupancy Sensor-Simulators.
Regards
Gerrit
SOURCE: mercedes clk 200 fault code
you can easer the code by this tool, and or
In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling.
Inspect all vacuum and PCV hoses, replace if necessary.
Check for a dirty fuel filter and proper fuel pressure.
Whenever
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS and BCM faults and others) as long as the light is on. You must
now have the dealer hook up a special electronic diagnostic tool and
"scan" the system for the fault code that is stored for the
problem(s)
Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module
63 views
Usually answered in minutes!
×