2002 Saturn VUE Logo
Posted on Jun 26, 2009

2002 Saturn Vue Ignition Cylinder lock problem

I have had to put 2 ignition cylinder locks in my 2002 Saturn Vue in the last 2 years. The local garage that I use replaced it last week and the key still doesn't want to turn even with the new key they gave me. I called the Saturn dealer and they said there weren't any recalls or anything pertaining to this. I am thinking there is more wrong making the key not turn. Can you please help?

1 Answer

AstralTravlr

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 9 Answers
  • Posted on Jul 23, 2009
AstralTravlr
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jul 23, 2009
Answers
9
Questions
0
Helped
4391
Points
19

The keys on this vehicle have a problem with wearing down to the point where it's a pain to get them to work in the ignition cylinder. Examine your keys for wear and that may have been your problem since day one.
I have a 2004 Vue and I have the only key I got with it (used car) worn down to the point where it will no longer work in the back door and is a pain to use in the ignition cylinder. It also falls right out of the ignition cylinder when the car is running. I have a copy of the key that was made when I got the car which works just fine and doesn't fall out, and looking at the two side by side, you can see that Saturn's key has worn down substantially since I got it two years ago.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 Saturn Vue my key wont turn on engine, problems leading to this often won't start have to reinsert key then it works sometimes key falls out and car still running?

Our Professional Tech Jeff provides the answer


It is a known issue

Ignition cylinder replacement DIY? - SaturnFans.com Forums

SaturnFans.com http://www.saturnfans.com > ... > Vue Tech
Sep 27, 2009 - I have run into the very common notchy/sticy ignition cylinder problem on a 2004 Vue. ... $60 for the Saturn lock cylinder on the Vue is starting ...

2007 Vue--ignition, new housing and keys - SaturnFans.com
Sep 30, 2019
Ignition lock cylinder removal question.... - SaturnFans.com
Mar 5, 2006
Free ignition lock cylinder fix.... - SaturnFans.com Forums
Jul 30, 2010
Ignition Lock Cylinder Replacement 2004 Saturn Ion
Mar 20, 2013
More results from www.saturnfans.com

Saturn Vue Ignition Lock Cylinder Replacement Cost

RepairPal.com https://repairpal.com > estimator > ignition-lock-cylind...
The average cost for a Saturn Vue Ignition Lock Cylinder Replacement is between $139 and $174. Labor costs are estimated between $65 and $82 while parts are ...

Videos

0helpful
1answer

Key will not turn in the ignition------replaced key still no luck saturn vue 2003

You have a bad lock cylinder. the tumblers inside dropped. you will have to replace the cylinder
0helpful
1answer
0helpful
1answer

Key sticks in ignition and won't turn

here is what u need to do, go to a local locksmith, hardware store or auto parts store and buy a tube of powdered Graphite lock cylinder lube, spray a little into the ignition lock cylinder and insert the key a few time, apply again and this should cure the problem, if it doesn't u will need to have the igntion lock cylinder replaced, do not use anything other then lock cylinder dry lubricant, WD40 or other oily lubes will make matter worse in the ong run.
1helpful
2answers

How do I remove the ignition lock cylinder from a 2003 Saturn Vue for rekeying?

REMOVAL
  1. Disable SIR system. (Refer to "SIR Disable/Enable Procedure (For Frontal and Curtain Inflators)".
  2. Disconnect negative battery cable.
  3. Remove lock cylinder bezel from steering column shroud by carefully prying with thin blade screwdriver.
  4. Remove shroud fasteners and remove steering column upper and lower shroud panels.
  5. Insert key into ignition lock cylinder and rotate to RUN position. Then rotate ignition cylinder back to ACC position.
  6. Depress locking button on side of ignition module assembly with a thin pick-type tool. Slide lock cylinder assembly from ignition module.
INSTALLATION

IMPORTANT: Actuator blade within ignition module housing must be in ACC position to install lock cylinder assembly. If rotated, replace it to ACC position, using needle nose pliers.

  1. Insert key into ignition lock cylinder and install into ignition module.
  2. Install steering column upper and lower shrouds and shroud fasteners.
  3. Install lock cylinder bezel.
  4. Connect negative battery cable.
  5. Enable the SIR system. (Refer to "SIR Disable/Enable Procedure (For Frontal and Curtain Inflators)".

0helpful
1answer

How do you program the keyless remote on a 2002 Intrigue?

1. Close the vehicle doors.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Press and hold the driver side door lock switch in the UNLOCK position.
5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder.
8. Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated.
9. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed (this take approximately 15 seconds).
10. Perform the previous step to program up to four transmitters (including your old ones).
11. Remove the ignition key in order to exit the Program Mode.


Good luck and thank you for using Fixya

0helpful
2answers

Key will not turn in ignition

Yes always try a new key 1st,Go to saturn dealer and let them cut one from the vin#,this will give you a very crisp key then use some spay liquid wrench (Get at local hardware) Spray into cylinder,then install new key.This will make the tumblers free up.Works 8 out on ten times.
0helpful
2answers

Have 2000 saturn sl1 replace cyl and keys in

try putting the shifter in N and move the pressure off the wheel.
1helpful
1answer

I have 2007 Saturn Vue. When I put the key in the ignition it wont turn the car on. I put grafite in the lock . It got better but not much. Most annoying thing in the worlf

You should still be under warranty, unless you have more than 36,000 miles. Take it in and tell them the ignition cylinder is binding. There is a technical service bulletin for this issue that says they need to remove the cylinder, clean it, and lubricate it with a special lubricant. If this still doesn't fix it they will need to replace the ignition cylinder and probably the ignition cylinder housing too. The bulletin number is 06-02-35-016c, this should help who ever gets to fix this.
Not finding what you are looking for?

1,738 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...