Shift solenoid p0753 - 1999 Jeep Grand Cherokee

the codes are OBDll and are available on line free.
Example P0740 The diagnostic trouble code or DTC P0740 stands for "Torque Converter Clutch Solenoid Circuit/Open Circuit Malfunction.
P0753 The P0753 code indicates that the shift solenoid in transmission shift solenoid A, which changes the gears based off commands from the power train control module



all codes are transmission related.

code p0753 refers to shift solenoid(SS) A-electrical===causes--wiring--shift solenoid--ECM/TCM
The fault is electrical as it is a solenoid ( an object that has a coil wound around a core in which a bar of steel is magnetically moved when the coil is energized This bar movement moves valves or locks bands or clutches)
Change the solenoid and check out the transmission control module(TCM).
changing the oil will be good for the transmission but will not fix the electrical fault.

That is a transmission fault with several possible causes.

P0753 Shift Solenoid Electrical

P0753 HONDA - Shift Solenoid 'A' Circuit Fault



Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'A' valve
- Shift solenoid 'A' valve harness or connectors
- Shift solenoid 'A' valve circuit is open or shorted

P0753 - Shift Solenoid A Electrical
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'A' valve
- Shift solenoid 'A' valve harness or connectors
- Shift solenoid 'A' valve circuit is open or shorted


Read more: http://engine-codes.com/p0753.html#ixzz31EB1WygL

those are all codes for the shift solenoids in the transmission. very easy to get at.

P0753 - Shift Solenoid A Electrical Problem. Possible causes - Faulty shift solenoid A valve
- Shift solenoid A valve harness or connectors
- Shift solenoid A valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

P0753 Shift Solenoid A Electrical its inside of transmission not very easy to replace it controls the shifting of the transmission
P0763 Shift Solenoid C Electrical its another transmission shift solenoid
P0758 Shift Solenoid B Electrical another shift solenoid now my question to you is your transmission shifting normal have you had any work done to your car recently like changeing any seals on your transmission to have theses replaced by a mechanic its gonna be very expensive i could tell you step by step how to change them with theses codes you should be haveing serious shifting issues if you dont have shifting issues reset codes and see if they come back if they do then it could be in the wireing harness comeing from transmission hope this answers your question happy holidays

P0753 means your powertrain computer detects a continuous open, short to ground or short to power in the circuit to your transmission's 1-2 shift solenoid. When the code is active, your transmission runs in a fail safe/limp home mode that only lets certain gear ratios function in the transmission.

The solenoid in your application looks like this
and it is located sometimes on the side of the transmission, but my guess is from the looks of it, it might be found inside the transmission, only accessible with the oil pan removed.
The problem might be the solenoid itself, or the wiring going to the solenoid from the computer that controls the transmission, or the computer itself.

P0740 is TCC circuit malfunction P0753 is shift solenoid A circuit electrical P0758 is shift solenoid B P1406 is EGR pintle position and P01860 is TCC circuit.