Brake light and abs light are on
SOURCE: BRAKE WARNING LIGHT
I dunno if this will work on your BMW, but on my BMW Z3 and M3, it was....
Turn the ignition key to position 2, but do NOT start the car. Wait for
about 45 seconds and the brake warning message will be reset.
If it doesn't reset, then the brake sensor was damage. You will need to replace the brake sensor. It sounds like you replace the brake right after you saw the warning, so the brake sensor should be okay.
SOURCE: Speedometer, RPM, ABS, and Brake light
It's not the fuse. You need to jump start the diagnostic cable. First you need a battery of 9v and short the + and - terminal to the diagnostic cable. Then you will see smoke. After that it should work fine.
SOURCE: BMW 320d 2005 Brake pad warning light reset
What it sounds like to me is that they didn't replace the "brake sensors" when they did the job. They are a seperate part and if whomever changed your brakes didn't charge you, I think like $20, for the part, then that's the problem.
SOURCE: bmw 530i 2001 abs and traction control light on
abs control module is bad
Testimonial: "thanks how much is an abs module cost and is it necessary to fix right away"
SOURCE: BMW warning lights: BRAKE, ABS and DSC
i need anyone one to help me with this problem, i have a BMW328ci and i tried tyo get out of my house this morning and all roads were frozen and the car started sliping and i activated the dcs button and car was still slipering and then brake, ABS, CBC & DSC lights turned on and i need to know how i can reset these lights so they can come off
179 views
Usually answered in minutes!
×