I turn the key and it starts but then it wont stay started, help?
SOURCE: 2000 jeep gc wont stay running
Lock all the doors unlock the doors with the key because the security system thinks its being stolen and it shuts off the injectors
Try another key the chip in yours may be defective.
www.aceautomotive1.com
SOURCE: 1997 jeep wrangler wont start
I had same problem. Ended up having to replace ignition switch, then gauges and jeep started right up
SOURCE: if gauges dont work jeep wont start
Had same promblem with my jeep, you may want to check the
"crankshaft sensor" if its bad jeep wont start.
SOURCE: 2006 Jeep Wrangler won't start
First, make sure you can turn the engine by hand. If you can't then the starter can't turn it either. Have someone else turn the key and look for the source of the click...may be a relay. Go over the starting circuit with a volt meter. Check for power at the starter main terminal and then with the key turned to "start" check for power at the trigger terminal on the starter. Check battery voltage and check relay operation.
You have a neutral safety switch on the transmission if its an automatic and a clutch switch if it's a stick. Check them as well. Make sure battery grounding on fender and block are also clean and secure.
Testimonial: "Will try! Thanks!"
70 views
Usually answered in minutes!
×