Replace glove box light bulb
SOURCE: trying to replace a front headlight bulb on 2001 acura 3.2 TL
Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.
btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and
the ignitor. The bulbs usually start to loose their color long before they burn out.
The inverters/ballasts either go out after a while or take a while to
start up.
Before you spend money on a new bulb, try swapping it with the one on
the other side. You'll need a security torx screwdriver to get the
covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.
If the problem stays on that
side, try swapping the ignitors. They're mounted inside the black
covers.
If the problem is still on that side you've got a bad inverter. They're
mounted on the bottom of the headlight assembly. You'll need to remove
the front bumper and remove the headlight assembly to get to it. (I
recommend you take pictures as you remove things so can put them back
together correctly.)
SOURCE: HID BULB REPLACEMENT 2003 ACURA TL DRIVER SIDE
heres the procedure I uploaded it for you click [b][i]HERE[/i][/b]
SOURCE: HOW DO YOU REPLACE THE DRIVER SIDE HID BULB ON A
http://senduit.com/342371 heres the procedure from the factory manual
SOURCE: my Acura 2003 TL 3.2 stop working all both system
it is probably the blower motor resistor, had the same problem on 2003 CL Type s, the fans for the A/C and heat just stopped working was the symptom . The part is only about 70 dollars.
105 views
Usually answered in minutes!
×