Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 27, 2014

Dodge ram seat back stuck in forward position

1998 Dodge Ram

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 07, 2008

SOURCE: can't open quad cab door on 1998 dodge ram 1500

just finished tonight with the same problem on my 2000 ram, i cut the studs out with a drimel tool, and also the latch, with this out of the way the door opened easily,, have to replace bottom latch later . total time about 1 hour tigerhunting

Ad

Anonymous

  • 8 Answers
  • Posted on Jun 18, 2009

SOURCE: I have a 1998 dodge ram. Does the transmission

No ..there is no vacuum modulator on any dodge transmission...they never ever had them

Anonymous

  • 158 Answers
  • Posted on Jul 02, 2009

SOURCE: I need the location of MAF sensor in a 1998 Dodge

Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.

Anonymous

  • 1 Answer
  • Posted on Jul 23, 2009

SOURCE: 1998 dodge ram 1500 v85.2 towing capacity?

according to the owners amnual the max towing weight for a 1999 ram 1500 quad cab wit automatic transmission is 7600 lb.
with either 5.2 or 5.9 v8. for a reg cab it is 8000 lb.

kirtec auto

  • 1348 Answers
  • Posted on May 18, 2010

SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Key is stuck in ignition receiving no electricity

You are not the only one:

Key stuck in ignition, wont start, dodge ram pickup - Fixya

www.fixya.com/.../t14560159-key_stuck_in_ignition_wont_start_dodge
Oct 6, 2012 - key stuck in ignition, wont start, dodge ram pickup - Dodge Ram 1500question. ... 631 Answers. SOURCE: 1999 Dodge Ram 1500 Pickup error code p0171. This code means ... Jun 28, 2011 ' 1987 Dodge Ram 50 · 1 Answer .
0helpful
1answer

Where can I get a power seat track motor for 1998 dodge ram? Need up and down.

I guess the motor was bad!
Lots on the Bay: 38results for dodge ram seat motor

Of course local junk yards or Parts Reclamation Processors
Could try Craigs too
craigslist sites

Good luck!
1helpful
1answer

I bought a power drivers seat from a 1998 dodge ram. I have the wiring out of the truck but need to know where the wires connect. I have a 1997 dodge ram with manual seats and it's not wired for power...

The wiring should be mostly self contained in the seat. All you should need to provide is a power source and a ground. There are many places to tap into a 12V source.
I have linked to a nice wire key for that truck:
1998 2001DodgeRam Vehicle Wiring Chart and Diagram

The video may not be much help but it may help identify the connections

0helpful
1answer

2014 dodge ram front seat tilt latch

Is this a power seat or a manual seat adjustment
13helpful
1answer

Need the firing order for a 1998 dodge ram 1500

For the 1998 Dodge Ram 1500 5.2L V8:
It is the same for the 2WD and 4WD

Firing Order:
1-8-4-3-6-5-7-2

Cylinders:
..........(back)
_____..........._____
|...8...|..........|...7...|
|...6...|..........|...5...|
|...4...|..........|...3...|
|...2...|..........|...1...|
..........(front)

Distributor:
........(back)
............3
....4..............6...
.......................(+)-screw: rounded-end of Cap
8......................5
(+)-screw: square end of Cap
.....1...............7
..............2
.........(front)

Rotation: Clockwise

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!
0helpful
1answer

My 98 dodge ram seat belts wont unlock the seat belts are in the seat

seat belt lockup on 1998 dodge ram how do i unlock them
3helpful
1answer

How to remove rear seat in 1996 dodge ram 1500

REMOVAL & INSTALLATION
  1. Clamp the seat belts to keep them from retracting.
  2. Locate and disconnect seat wiring at the connector(s).
  3. Move front seats forward or back for access to the hold down hardware.
  4. Put the rear seats in the stowed position.
  5. On Durango 3rd row seats, lift the cushion upward and forward to floor cargo position.
  6. Remove the hardware securing the seat.
  7. On split bench models, lift the center seat upward to clear attachment stud
  8. Remove the seat from the vehicle.
NOTE Do NOT activate the track adjusters once the fastening hardware is removed.
  1. Installation is the reverse of removal.

336abe0.gif


Fig. Disconnect the wiring from under the seat

36c62e2.gif


Fig. Seat track mounting hardware locations-typical


d95c538.gif

Fig. Bench seat components: seat (1), nut (2), stud (3), floor pan (4), bolt (5)-Ram


1589e1e.gif

Fig. Split bench seat assembly-Ram


616f086.gif

Fig. Bucket seat mounting components-Durango shown


851105e.gif

Fig. Rear seat removal/installation


I hope help you with this; good luck (rated this help).
2helpful
1answer

Front seat in 1996 Dodge Ram Pickup won't slide forward or back

1.Make sure the stiff wire that crosses under the seat to the passenger side latch hasn't come off. 2.Soak the slides with some good penatrating oil (NOT WD40!).
Not finding what you are looking for?

112 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...