SOURCE: interference engine
all of the engines used in the hyundai's are interference engine's, that does not mean for sure u have bent valves but the chances are u did. source of info Gates timing belt Catalog.
SOURCE: Is the 2001 Ford escort ZX2 L4-2.0L DOHC engine
All of Ford's belt driven engines are non-interference with the exception of the 3.0L villager which was really a nissan.
SOURCE: Replacement of timing belt for 2004 Hyundai Elantra
Just the belt if that is all you need. I would replace all the other belts as well. The Water pump pully has to come offYou can visual the pump better at that time. The easiest way to get the pully back on and off is to remove the Power steering resevoir and transaxell mount in fron middle. Jack the engine up as high as you can get it. Put a block under the pan when jacking to spread the push force. this will tilt it back and up so the pulley will stay ion the water pump nub. It is a two piece pully.
SOURCE: 2003 Hyundai Elantra GLS. Check engine light, code PO133
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
SOURCE: where is the fuel tank air filter located on the
the fuel filter is located in the fuel/gas tank
Testimonial: "waiting for second answer "
1,479 views
Usually answered in minutes!
×