Looking to put seat covers
If you tilt all parts there, you will see bolts.
all seats are bolted to the body , pan.
just look, first, and see the operators guide, turn to page
for tilting seats. in the rear. for increase cargo.
easy no?
SOURCE: Removing seat covers on 2000 Jeep Wrangler Sahara
The seat covers are held on by "hog rings" They are steel rings that are clamped around the metal wires. You will need to use cutters to take them off. When you get ready to reinstall new covers, you will have to get a set of hog ring pliers, and some hog rings.
SOURCE: Need to remove head rest to put on seat covers
I looked into new headrest for my 2005 Grand Cherokee with the monitors installed in them. I had mine off but couldn't remember how i did it. But I got the instuctions from the the company with the new headrest and they linked me to a video online. The company was on ebay. I remember that it was really simple
SOURCE: remove 2007 jeep compass bumper cover
Hello, I can assist you. Begin by rounding up the necessary tools:
7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291
SOURCE: the back red lights from my jeep compass 2011 are on,how do i turn them off?
Is it the brake lights,if so,go to brake pedal and check stop light switch,may be loose.If it's your rear lights,then it could be light switch is bad.
706 views
Usually answered in minutes!
×