I was doing some research and can't seem to find any credible detailed info or better yet some type of u-tube or related videos on rebuilding or even reassembling my Previa 2.4 L non-turbo engine. I removed the head because it was cracked. I already learned here that removing the entire engine/drivetrain is the better way to go. Thanx for all your help. [email protected] Yours, JAF
SOURCE: S70 GLT head replacement
the easiest way to remove the head is to completely remove the exhaust manifold from the engine and turbo assy. you CAN just unbolt it from the engine , but it takes a good bit of wiggling to get it off if you are leaving thre manifold in the car
SOURCE: Engine torque settings VW lt 35 1993 2.4 turbo diesel. Code ACL
bob go to collsionrepairadvice.com and I will send the download to you its a big file
SOURCE: 05 dodge ram 3500 diesel 5.9 codes p1751, 1753,
Assume you have tried earseing those codes and they keep coming back?
May have a loose or bad ground the engine harness sensor circuit.
Testimonial: "Thanks, I have taken the truck to a specialist in re-flashing electronics etc and he thinks there is something in the circuit to the tranny.tks"
SOURCE: rebuilding 2001 Astro differential
Yes you can, that 's the best way, just remove rear end cover and axle's your there.
Testimonial: "Simple question, but it is amazing how many people (including mechanics) I asked who were unable to say simply yes or no. Thank you!"
58 views
Usually answered in minutes!
×