SOURCE: 1992 Plymouth Sundance 2.2
the wire is feed by the asd relay as commanded by the computer to supply power upon seeing cranking rpm. the wire also feeds the injectors and other sensors. the wire you need is in a harnes that runs from the drivers side to the passenger side just behind the back of the valve cover.
good luck chris
SOURCE: Replacing the heater core on a '88 Plymouth Sundance?
Behind the dash. You will have to pull the whole dash assembly. It looks like a little radiator.
SOURCE: drivers side windshield wiper not moving
The bolt that holds the wiper on is loose. There is a little plastic cap at the other end of the wiper arm, the side away from the wiper blade. Remove the cap and tighten the bolt. That should get it going again.
81 views
Usually answered in minutes!
×