You will need the dealer to scan the body control module (BCM) for fault codes.
SOURCE: 2006 Criuser won't start and intrusion alarm can't be stopped
YOUR WIRELESS CONTROL MODULE(SENTRY KEY MODULE)MAY BE ELECTRICALLY LOCKED UP..THERE IS A SERVICE BULLETIN FROM CHRYSLER..YOU CAN REMOVE IOD FUSE IN FUSEBLOCK(UNDERHOOD BEHIND AIR CLEANER..IGNITION OFF DRAW(IOD)THIS WILL RESET WIRELESS CONTROL MODULE AND VEHICLE SHOULD START AND LOCKS RESPOND AGAIN..IF IT DOES,THE WCM WILL HAVE TO BE REPLACED AND THIS NEEDS TO BE DONE BY DEALER
SOURCE: 2006 Chevrolet Uplander Parking Lights Stay On
My 2006 Uplander would not shut off the parking lights. I came here for a solution. I saw the answer here, actually the question, and I used the key fob to lock the vehicle. The lights went off. That was a temporary solve. Now, is this a "glitch" or a "feature"?
SOURCE: Horn honks when unlocking doors.
If your vehicle is equipped with a factory keyless entry system and you have the owner's manual, there should be a section in the manual describing how to change your options with your system. But if you have an aftermarket system, which I am thinking this the case, you will have to manually go into your dash under your steering wheel and cut the wire going to your horn from the security system. Once you have accessed your wiring underneath your steering wheel, there is a main harness with a bunch of wires going to the steering wheel. In this harness you will find a DARK GREEN/VIOLET small gauge wire and you should see another wire tapping into it probably coming from the security module. Just cut it off but leave the DARK GREEN/VIOLET untouched and this will eliminate the horn honks.
67 views
Usually answered in minutes!
×