Will not open
Have you checked the fuse ? if ok check that power is getting to and from switch , if ok check that power is getting to the motor , will have to remove the switch cover etc let me know how you get on
Posted on May 14, 2014
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
SOURCE: sunroof leaks on 2001 land rover discovery
should be a seal issue, not mechanical. Is the roof opening/closing properly? If so, while open examine the weatherstripping and look for damage or abnormal wear. with power roofs, sometimes the movement wears down the sealing abilty pending on its usage or debris hiding inside.
Posted on May 05, 2009
SOURCE: fitting thunderpole CB radio into a Land Rover
Your best bet with any radio install is to wire both the positive and negative leads directly to the battery. While it might be convenient to use an existing, unused +12V feed, the interference any stray RF power can cause to existing vehicle systems is very unpredictable.
Best bet is to trace across the front of the headliner and go down the passenger side "A" post. From there you should be able to make an easy hole for the power leads adjacent to the radio antenna wire. This is the wire that comes out of the firewall and loops directly into the passenger's side front fender.
Also, be cautious with your mounting and drilling, as some discos have an ultrasonic sensor for the alarm system in the center roof area.
Good luck!
Posted on Feb 11, 2010
SOURCE: my seats just died on my new LR2
there are connectors on the back side of the switch panel on the bottom side of the seat, but the plastic trim panel is a pain to take off. you can check to see that all is still plugged in and nothing came unplugged accidentally. odds are that your module will need to have some updated software downloaded by the dealer. i feel your pain though, i was one of many of land rover's technician layoffs!
Posted on Feb 17, 2010
SOURCE: how to reset oil service meter 2008 land rover lr2
You need to have it reset by dealer or someone who has OBII scanner (fault scanner) Autozone, Advance & other auto parts stores can do it for you.
Posted on Jan 07, 2011
SOURCE: i need the location for
looked in my bible and i cannot find this number but the later models are all under the passenger side dash behind the glove box but some are showing in the middle of the bulkhead under the wiper mechanism ,hope this helps
Posted on Apr 21, 2011
Mar 27, 2018 | Land Rover Cars & Trucks
Sep 29, 2016 | 2009 Land Rover LR2
Aug 02, 2015 | 2008 Land Rover LR2
Jun 14, 2015 | 2009 Land Rover LR2
Jul 25, 2014 | 2009 Land Rover LR2
Jan 26, 2014 | Land Rover Cars & Trucks
Nov 14, 2017 | 2008 Land Rover LR2
May 08, 2012 | 2008 Land Rover LR2
Jan 01, 2012 | Land Rover LR2
Jan 07, 2011 | Land Rover LR2
802 people viewed this question
Usually answered in minutes!
×