How do you replace a license plate light on a Dodge Stratus?

SOURCE: # 4 fuse blew out,

I KNOW YOU HAVE AN ELECTRICAL SHORT.WAS AN ALARM INSTALLED OR ANY OTHER TYPE OF ACCESSORY? CHECK WITH DODGE TO FIND OUT ABOUT A RECALL.IF SOMETHING WAS INSTALLED, TAKE IT BACK THERE TO STRAIGHTEN IT OUT IF NOT HAVE A AUTO TECHNICIAN CHECK IT FOR YOU.

SOURCE: 1999 Dodge Neon rear license Plate bulb

LICENSE PLATE LAMP BULB
REMOVAL

1. Remove screws attaching license plate lamp to rear bumper
2. Remove lamp from bumper.
3. Remove bulb socket from lamp.
4. Pull bulb from socket.

1. Install bulb into socket.
2. Install bulb socket into lamp.
3. Place lamp in position.
4. Install screws attaching license plate lamp to rear bumper.

SOURCE: no power to tail lights or license plate light.

check the fuse with a test light on both sides of the fuse,
next would be the headlight switch.

SOURCE: dodge stratus 2004 head light bulb replacement

Headlight Bulb Replacement
1. Open the hood and remove the two headlight mounting
screws.
2. Remove the push-in fasteners for the grill area by prying under the
head of the fasteners with a flat bladed tool.

SOURCE: Dodge Ram 1500. I have no tail lights, license

have you had your problem corrected. I just experienced the same problem. I keep finding info on changing the fuse box in order to fix the problem.