Ford ecoboost problems

The torque should be around 12 to 18 ft/lb (16 to 24 Nm) on most engines. The settings for the Focus and the Escape are slightly different so work to about 15 ft/lb (20Nm) for both cars.

On the side of every engine block, there is a line of circular depressions about 1.5 inches wide & 1/4 inch deep. These are actually holes in the side o

There are three dealerships

https://www.google.com/search?q=Winnipeg%2C+volkswagen+dealership

..

what engine is there size (gasoline sure) but what>?
if you go to ford, online and look it is there.
some cars have no PCV valve, just hose with on board ORIFICE.
wanting one, can be a problem, not told why at all , rumors>)
USA or not? 5 engines not one can I guess unseen or VIN told.
gen 6

2.0 L EcoBoost I4-T 240 hp (2013-2017)
3.5 L Cyclone V6 263 hp (2010-2012)
3.5 L Cyclone V6 288 hp (2013-2019)
3.5 L EcoBoost V6 365 hp (2010-2019)
3.7 L Cyclone Ti-VCT FFV V6 305 hp (Police Interceptor Sedan, all-wheel drive only) (2013-2019)

That's not how it works. To look up a torque spec, we need the year, make, model, engine. We have no idea what model you're working on.

There's a plastic cover on the front of the engine held on by 2 bolts just remove the bolts and slide the cover off the fuel filter is right there. I hope this helps. Take care.

P0087 Fuel Rail System Pressure Too Lowvar ezzns2 var ezoflbf 2 2 function...
Fuel pump driver module on these ford F-150 is located on the frame or axle housing above the spare tire . they corrode get water inside an short out .
FPDM Live

You fix the problem. It resets itself when the trouble is fixed. You can erase the code with a scan tool, but if the problem isn't fixed it'll light up again. There is no "reset"

They asked ab drain plug for 2013 ecoboost to drsin the block of coolant,there are 2 one behind starter and one on drivers side as well but a real pita to get to

this video by ford may help