Please decode my Porsche 911 motor.thanks steve
SOURCE: i have a porsche 911 with electric windows and the
to all ... it is easy..
position the(window) switch so the one (single-male )connector is up.
To this connector goes the split red-black stripe wire -the other end goes to the bottom left.Bottom right is the brown wire.
Middle wires are blue with white and black stripes .Position them so the window goes up correctly when you use the switch.
that is all ,now you can plug the switch back to the panel...
proporsche
[email protected]
SOURCE: oil leaking on 1987 911 porsche around base of
It could be oil pres switch under the air flow meter,
most likely it is the thermostat o ring.It is an insert on the top of the engine.
You will need to remove the air flow meter from the with complete air filter first.
Than i recoment to remove breather hose (1clamp) on it.That is the rubber hose you will see there.
Than 10mm socket and an extension to remove sensor bracket ,the is the wire you will see there which goes across the Thermostat insert.In the same time you can see if the oil press.switch is wet-if yes replace it-.)
Remove the 2 nuts and washers,remove the thermostat insert and check the o ring most likely it is very hard ..replace..
Check as well the breather cover it self(it is the alumin.unit you have taken the breather hose from,this gasket leaks too...
that`s all
proporsche
SOURCE: Porsche carrera 911 1999 3.6 overheating problem!!!
either the expansion tank is just cracked or there is a head gasket problem.
SOURCE: I need Porsche 911 SC\Carrera heater blower motor
there are lots of dismantlers like partsheaven. or you can go through pelican parts.
178 views
Usually answered in minutes!
×