The fuel filter is generally located on the drivers side underneath the vehicle.You will need a floor jack and stands if available.Once you have securely lifted vehicle to desired height you should be able to view the filter,just simply follow the fuel line.Tools required,open faced wrenches.
The fuel filter is located under the car along the frame once found the inlet side has a plastic line and clip push line towards filter and then depress sides of clip and slowly pull off filter gas will leak out of filter and line then remove filter from mounting bracket and loosen the hex line with a flare wrench 16mm if OE filter the nut size on filter is 20mm some replacements are 19mm but you can hold this with a crescent wrench spin out and remove line reassembly start and run car and check for leaks.
94 views
Usually answered in minutes!
×