1991 S10 blazer 4x4 4.3 popping coming from the front

When you replace the sway bar bushing you buy the kit and it should come all that you need except tools. you should have 4 bushing,2 tube looking things,4 washer things,2 long bolts. 2 flat washer,2 lock washer,2 nuts, let me know how it went

For the 1991 Chevrolet S10 Blazer 4.3 V6, Both: 2WD AND 4WD:

Firing Order:
1-6-5-4-3-2

Cylinders:
.......(back).......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor:
....(back)
(+).4...3
5...........2
..6...1..(+)-screw
.....(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

991 Chevy S10 firing order
The firing order for a Chevy s10 depends on which engine you have.
1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise.
2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise.
2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise.
4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

one is a return

This is all I've got.Hope this helps?

not really. IT is under the dash on the passenger side. You should put some plastic down or pull the carpet or it will get soaked with anti freeze

go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!

did you try changing the fuel filter or scanning for codes? This would be a great place to start.

when i start my 91 s10 blazer it try to stall so i have to give it gas to keep it running then when i leave out of the drive way and go down the road it has problem get the right amountof gas to go but once it hit 60 -70 mile an hour its fine

http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.