SOURCE: need to no the number one cylinder on a mazda 626
1cylinder is first from passenger side of car!firing order is 1342!
SOURCE: how to set timing marks on a 1999 626 4 cylinder
how i need to do to put my timming dot on the right position?
SOURCE: Want to remove the ignition lock cylinder since a broken key is stuck inside.
get a phillipshead un do about 4 screws from underneath plastic cover which hides steering colume. remove cover you will see white plug on the left hand side of ignition barrel disconect.then right hand side there will be acable disconect.now get a small chissel and anti clockwise tap bolts which have no heads on them that are on top of steering colume when they are alittle bit lose use plyers its easier pull bolts out clamp will then come of and then you can pull whole ignition of. now there is 2 brass pins which hold barrel in ignition up near the key end remove and barrel will come out but it might be easier to take whole ignition to locksmith and get them to do it and get new key for around 30 bucks i did a mates about couple months ago seeya orangepeel.
SOURCE: 1994 mazda 626 4 cylinder transmission hold light
Hi, The best way is to take it to a Auto Trans Specialist who will put it on an obd scanner (saves alot of mucking around & costs about $50) this should tell you exactly what needs to be fixed.
SOURCE: where is fuel filter located on mazda 626 2002 4
Locate the fuel tank underneath the rear of the vehicle. It should be inline on the drivers side of the car. If not, it is underneath the hood on the fuel lines that lead to the fuel rail conected to the intake manifold.
35 views
Usually answered in minutes!
×