At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When setting the cruise control first you have to be going more than 30-35mph.then press the on button then when at the desired speed press the set+that should do it the set-is the coast button and the resume button will bring you back to the last speed setting remember if you touch thr brake pedal it shuts of the cruise while in motion
run fault codes to find any faulty sensor. You may have to take it to a vehicle gas installer to have the gas system checked out as the unit may be corroded inside.
Once you have turned your cruise control on accelerate to desired speed press SET button on right hand side of steering wheel before lifting foot from accelerator, then remove foot from accelerator. pushing RESUME button will deactivate cruise control without turning it off. Then when clear of traffic push resume again to activate cruise control. It will automatically resume to previous set speed.
there should be two skrews in backe of steering wheel may be dificuklt to see there may to plastic covers over the screws as well or may be four screws
Hello, First the vehicle has to be operating at least 35mph. There will be two sets of switches, one set is to the left and the other set is to the right of the horn on the steering wheel. The switches on the left will be labeled on/off, the ones on the right we be labeled Coast/Accel/Resume..
At a steady highway speed press the ON switch, (at the left hand side of the horn) This will activate and turn the speed control system ON...
Then you have to set and adjust your desired speed...
To SET YOUR DESIRED speed , press and hold the accel switch (Right side of Horn) until your desired speed has been reached and then release the switch.. Speed control will now be on, activated and set, you will be in cruise mode..
If you need to coast due to possible traffic, press and hold the coast switch as long as you need to.. This is like taking your foot off of the accelerator pedal.. When you let go of the coast switch you will return to you set cruising speed.
Stepping on the brake pedal at any time will deactivate the system.. If you step on the brake, and then want to return to your previous set cruising speed... All you have to do is press resume...
I hope this has helped you? You can find detailed speed control activation instructions in your 2005 Ford Focus Owners manual.. If you did not receive your owners manual when you bought the vehicle.. You can purchase one at your local Ford, Lincoln or Mercury dealership..
If you hit "On", cruise control is on. It's just not set to the speed.
To properly set the cruise control, do the following procedure:
Select the "On" button on the left side of the steering wheel
On the right side of the steering wheel, there is a "+" along with "Set", press that button after you have accelerated to the speed you desire to maintain.
Use the "+ and -" to speed up or slow down your vehicle.
To temporarly disable the cruise control, simply press the brake pedal.
To resume the previously desired speed, press the top button "Resume"
cruise control on your escape will work at 30 mph and up. Press 'on 'button, then press gas pedal 'til u reach desired speed, press 'set acc' and you'll be cruisen. You can also do it this way, press 'on' button, then press and hold 'set/acc' button, car will accelerate, let go of button when u reach desired speed. Putting on brakes will deactivate cruise, u can then press 'RSM' to resume speed.
×