2007 BMW 335i Coupe Logo
Sukmoon C. Posted on May 08, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I have problem with hid light

How do I replace HID lamp on my 2007 bmw 335i.

2 Answers

steve

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • BMW Master 3,718 Answers
  • Posted on May 08, 2014
 steve
BMW Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Mar 09, 2009
Answers
3718
Questions
2
Helped
964337
Points
12533

Follow this link to u-tube video not the exact vehicle but the principle will be the same,or search for your exact vehicle
How to replace low beam xenon HID bulbs 2006 BMW 330i

Amrit sahni

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • BMW Master 283 Answers
  • Posted on Jun 24, 2015
Amrit sahni
BMW Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jun 20, 2015
Answers
283
Questions
0
Helped
138834
Points
1835

INSTALLATION GUIDE:
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Parts Identification:
Projector Headlight
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
TOOLS REQUIRE
10mm - 8mm socket
Philip Screwdriver
Crimper/Pliers
For more information about how to install your vehicle, come visit our youtube page on
http://www.youtube.com/spyderauto
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
STEP:
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
STEP:
PLS VOTE
I have problem with hid light - problem-hid-light-afy5cnsznmokzumyhdcbeseq-5-0.jpg

Ad

5 Related Answers

Anonymous

  • 55 Answers
  • Posted on Mar 04, 2009

SOURCE: 2007 BMW 335i

The N54 engine takes 7 quarts of oil with every oil change. But you shouldnt have to worry about that in the US because BMW covers all maintinace for the fist 4years or 50k miles. its not that hard to do though if you do need to perform it yourself.

Ad

armstrong750

  • 109 Answers
  • Posted on May 04, 2009

SOURCE: Want to loacate the Brake Fluid reservoir on the BMW 335i Sedan

it should be under the hood on the drivers side up close to the fire wall

Anonymous

  • 14 Answers
  • Posted on Dec 12, 2009

SOURCE: need to find fuse box for 2007 335i bmw

One in boot on the right hand around the battery somewhere, one under dash and could also be one under the bonnet, would be over to the left hand side of the vehicle. Not had to touch the electrics on any of these yet but generally thats where they hide.

Anonymous

  • 1 Answer
  • Posted on Jan 22, 2010

SOURCE: how can i reset oil change on 2007 bmw 335i twin

I have a 2007 335i convertible.. my low oil light went on.is there a dip stick or something. how do i tell how low iam

Azrael SRL

  • 11800 Answers
  • Posted on Jan 26, 2010

SOURCE: 2007 BMW 335i just had the

It means that the engine power has been reduced - either automatically when the brain of the car has detected a mechanical problem in the engine or you have engaged the rain mode.
Usually this happens when you use a low quality fuel. But i've stumbled on rare cases when the Vanos sensor valve was the cause. The only way to precisely tell which is expensive and implies a visit to a dealer.

Testimonial: "Thank you that helped alot!"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Passenger side headlight does not work on 2007 Pacifica. .

are you DIY, doing or did this work or others?
your hands? if did, see the HID bulb below?
head light , right side, dead (USA right side) ?
in UK passenger is LEFT side. so please say left /right

  • low beam
  • high beam
  • and high beam flaster switch
OR all 3 dead. selections dead.
and all other electric things work and car drives ok.
yes the 2 orange are parking lamps. all sides/corners and ends of car good parking lamps.

off hand using the wrong bulbs not reading the free users guide in the glove box for bulb number
USA answers only (me)
Chrysler maker
this car uses the BCM body brain to run front lamps
and does so using 4 outputs. 2 low and 2 high each side.

some of these cars have HID lamp options.
and are totally unique, for head lamps! IF TRUE.

standard bulbs are H3 TYPE. AND ARE NOT HID.
PAGE 406 IN THE USER GUIDE
HID BULBS ARE HIGH VOLTAGE LAMPS.
DO NOT PLAY WITH THOSE, OR GET SHOCKED
AND REQUIRE SPECIAL PARTS TO REPAIR IT.
Same page
On vehicles equipped with High Intensity Dis-
charge Headlights (HID), when the headlights are turned
on there is a blue hue to the lights. This diminishes and
becomes more white after approximately 10 seconds, as
the system charges.


the lost free manual is here by maker

https://vehicleinfo.mopar.com/assets/publications/en-us/Chrysler/2007/Pacifica/1577.pdf

and more
Do not touch the glass of High Intensity Discharge (HID) or halogen bulbs with fingers or other possibly oily surface. Reduced lamp life will result.

HID install 1 step says
Place the igniter on the HID lamp. Do not at this time connect the igniter electrical connector. It will make it unable to twist the igniter to the closed position.

the igniter can be bad.
HID uses D2S bulbs only .
Chrylser p/n
MOPAR 4865941AB
and looks like this.

VERY EXPENSIVE TOO. PARTS.


hid-undefined-undefined-0_0.jpg PARTS PAGE

https://www.rockauto.com/en/catalog/chrysler,2007,pacifica,4.0l+v6,1433518,electrical-bulb+&+socket,headlamp+bulb,11701
0helpful
2answers

How do I get the low beams to run automatically whenever driving instead of flickering?



if you did it yourself and did not use factory lights or ballast then it could be a voltage detection problem. If you did use factory parts then the headlight switch may have failed by coincidence. also check connections at HL plugs and or switch. ???????????

I’m happy to assist further over the phone at https://www.6ya.com/expert/howard_977676954994c5b2

0helpful
2answers

How do I replace front HID light bulb? and where can I purchase parts for replacing?



  1. INSTALLATION GUIDE:


  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights


  3. Parts Identification:


  4. Projector Headlight


  5. Halo & L.E.D.


  6. Bottom of the Headlight:


  7. Ballast Bracket, Halo Wires(red/black)


  8. Turn Signal Adaptor


  9. TOOLS REQUIRE


  10. 10mm - 8mm socket


  11. Philip Screwdriver


  12. Crimper/Pliers


  13. For more information about how to install your vehicle, come visit our youtube page on


  14. http://www.youtube.com/spyderauto


  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.


  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.


  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.


  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.


  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.


  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.


  21. STEP:


  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.


  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.


  24. Factory Xenon Headlight


  25. Spyder Projector Headlight using Factory Xenon Lights






replace-front-hid-light-bulb-purchase-afy5cnsznmokzumyhdcbeseq-5-0.jpg
0helpful
1answer

How do I replace HID on my carhow do I replace HID on my carhow do I replace HID on my carhow do I replace HID on my car

Disconnect wire connector, remove boot, unclip, pull out and reverse it for installation
0helpful
1answer

Headlamp bulb replacement. Driver side head lamp is out. Bought new bulbs. Owners manual says to contact dealership for replacement. How do I replace the bulb myself? 2007 Mazda6

I ASSUME they are just regular headlights....not HID....correct??? just take off the cover and there is a small clip, just unclip it and remove bulb. If they are HID, then you better not try it.
0helpful
3answers

How to install hid on a bmw 325xi 2006

INSTALLATION GUIDE:
BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
Parts Identification:
Projector Headlight
Halo & L.E.D.
Bottom of the Headlight:
Ballast Bracket, Halo Wires(red/black)
Turn Signal Adaptor
TOOLS REQUIRE
10mm - 8mm socket
Philip Screwdriver
Crimper/Pliers
For more information about how to install your vehicle, come visit our youtube page on
http://www.youtube.com/spyderauto
Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
STEP:
Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
Factory Xenon Headlight
Spyder Projector Headlight using Factory Xenon Lights
STEP:
pls vote an diam giving you link also for better help BMW e46 HID Headlight Replace
install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-0.jpg

install-hid-bmw-325xi-2006-afy5cnsznmokzumyhdcbeseq-5-2.jpg
3helpful
1answer

My 335i....actually a 2008 warning indicator gone haywire

There is an issue with the rear tail lamp bulb holders. BMW knows about this problem and released an updated part. Basically the bulb is not held tight enough, and occasinally loses contact with the holder. Your car should still be under warranty and any local BMW dealer should have the parts in stock.
0helpful
3answers

HID fog light

check your connections to the relay, sounds like something is breaking down under load
Not finding what you are looking for?

561 views

Ask a Question

Usually answered in minutes!

Top BMW Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...