Where is p0500 located? - 2001 Hyundai Santa Fe

take to transmission shop


P0700 Transmission Control System Malfunction


https://www.obd-codes.com/p0500

Hi Daron below are 3 short youtube videos showing the reason you have error code p0500 speed sensor code.......Hope this helps...
CHEERS..
https://www.youtube.com/watch?v=6ltIw-xzwKY

https://www.youtube.com/watch?v=h_bf_QitHGs

https://www.youtube.com/watch?v=KE64o3NAdkY

This is a vehicle speed sensor to fix this you need to replace the sensor located in the top of the transmission (on the top of the gearbox)

The P0500 code indicates a problems with the ABS system. If you have recently replaced wheel sensors, it sounds like one or more may be disconnected or flaky.

From datsc.com:
What does this mean? OBD Code P0500refers to
Basically this means that the vehicle's speed as read by the Vehicle Speed Sensor (VSS) is not working properly.
Symptoms Possible sumptoms of OBD code P0500
loss of anti-lock brakes the "anti-lock" or "brake" warning lamps on the dash may be lit the speedometer or odometer may not work properly (or at all) your vehicle's RPM limiter may be decreased the shifting of an automatic transmission may become erratic other symptoms may also be present
Causes Possible causes of OBD code P0500
A code P0500 may mean that one or more of the following has happened: The Vehicle Speed Sensor (VSS) is not reading (functioning) properly There is a broken/frayed wire leading to the vehicle speed sensor The vehicle's PCM is not correctly configured for the actual tire size on the vehicle
Possible Solutions The simplest thing to do is to reset the code and see if it comes back. Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly. If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure will depend on your make and model of vehicle. If everything looks OK, replace the sensor.

p0500

read this and ask questions
im typing for you, see>

https://www.google.com/webhp?gws_rd=ssl#q=dodge+P0500

read some of those. and get the answer
or look up the code in the FSM book (and what to test)

Perhaps this will help you find your problem:
http://www.toyotanation.com/forum/103-3rd-4th-generation-1992-1996-1997-2001/397692-what-should-i-check-next-p0500-code.html
I just love Google. I hope this helps you.

P0500 is Vehicle speed sensor A, Check owners manual for location of sensor. Check the wire harness in the jeneral area of this sensor for any vissible damage. Replace sensor if required. then have the code cleared from the computers memory. Good Luck. From Ernie @ RedDeer, Alberta, Canada.

What does that mean? Basically this means that the vehicle's speed as read by the Vehicle Speed Sensor (VSS) is not working properly.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook SymptomsSymptoms of a P0500 DTC may include:

• loss of anti-lock brakes
• the "anti-lock" or "brake" warning lamps on the dash may be lit
• the speedometer or odometer may not work properly (or at all)
• your vehicle's RPM limiter may be decreased
• the shifting of an automatic transmission may become erratic
• other symptoms may also be present

Causes A code P0500 may mean that one or more of the following has happened:

• The Vehicle Speed Sensor (VSS) is not reading (functioning) properly
• There is a broken/frayed wire leading to the vehicle speed sensor
• The vehicle's PCM is not correctly configured for the actual tire size on the vehicle

Possible Solutions The simplest thing to do is to reset the code and see if it comes back.
Next, check all wiring and connectors that lead to the speed sensor. The location of the sensor depends on your vehicle. The sensor could be on the rear axle, transmission, or perhaps the wheel hub (brake) assembly.
If the wiring and connectors are OK, then check the voltage at the speed sensor. Again, the exact procedure wil depend on your make and model of vehicle.
If everything looks OK, replace the speed sensor

They are not the sensors you want. The car uses the abs wheel sensors for vehicle speed. Your problem lies in the abs system , possibly the left front sensor, abs ecu or speedo cluster, Clear the code and see if it stay out otherwise you'll need to go to a trusted technician. .