SOURCE: replacing serpentine belt for dodge ram 3500 diesel
5.9L DIESEL
The 5.9L diesel engine accessory drive system (with a/c) consists of :
CAUTION:
When installing the accessory drive belt, the belt must be routed correctly. If not, engine may overheat due to water pump rotating in wrong direction. Refer to or for correct engine belt routing. The correct belt with correct length must be used.
1.
Position drive belt over all pulleys except water pump pulley.
2.
Attach a 1/2 inch ratchet to tensioner.
The 5.9L diesel engine accessory drive system (without a/c) consists of :
3.
Rotate ratchet and belt tensioner clockwise. Place belt over water pump pulley. Let tensioner rotate back into place. Remove ratchet. Be sure belt is properly seated on all pulleys.
SOURCE: serpentine belt diagram 2007 dodge 5.9 3500
get the belt routing from the local dealer.
they will not charge alot of money for a reprint from the factory service manual.
also
dayco belts come with the belt routing on the box.
SOURCE: 2006 Dodge diesel belt routing diagram
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8023
Testimonial: "Awesome! thank you so much for the quick response!"
SOURCE: 2006 Dodge Ram 2500 diesel truck----need inside fuse box diagram
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
SOURCE: I need a diagram show me how to replace the
HI. The first link will be the routing with the AC, and the second link will be without the AC Compressor. Click below to access both diagrams.
CLICK HERE FOR THE ROUTING WITH AC.
CLICK HERE FOR THE ROUTING WITHOUT AC.
340 views
Usually answered in minutes!
×