Question about 1994 Plymouth Sundance

Open Question

Low side ac port 1994 plymouth sundance location

Low side ACport location need to add 134a

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Jeff3fg

  • 124 Answers

SOURCE: Replacing the heater core on a '88 Plymouth Sundance?

Behind the dash. You will have to pull the whole dash assembly. It looks like a little radiator.

Posted on Mar 28, 2009

Ad
jturcotte

Jeffrey Turcotte

  • 8984 Answers

SOURCE: Can i use R-134a to recharge my AC unit in my 94

yes,

Please see my tip at http://www.fixya.com/cars/r5833579-auto_truck_c_recharge . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Sep 26, 2010

D3M0N_XD

ben brinkmeier

  • 5 Answers

SOURCE: Where is my gas tank located underneath my 1994

the gas tank is under the back seat.. to get to it u have to go under the car and everything sould be down thr.. (note) thr is a lil rubber plug on the tank faceing to back of the car.. DONT FULL IT! its hard to find a replacement and its a pain to only use a half take at a time.

Posted on Oct 01, 2010

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: Fan Relay 1994 Plymouth Sundance

Hi Eric:
Blower Motor is usually only in one of two different locations... the first is on passenger side, access under the hood or, second choice, under dash access behind glovebox.

In both cases the resitor will be in the duct that the blower motor blows through.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Posted on Dec 14, 2011

ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: engin light on 94 plymouth sundance

Check this procedure...
8_27_2012_5_04_55_pm.gif

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Aug 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind of ac coolant does it have 134a or r 12 and where is the low pressure port for the ac located


Depends on the year. Cars in the early 90's used R12. Anything later uses R134a. The size of the charge ports will define the R134a port. An adapter is needed to fit on the charging hose. R12 requires no such adapter. Ther charging label under the hood will tell you what refrigerant is needed too. Since you failed to give enough information on what make and model car you have, a general answer for the location of the low pressure port will be given. On the compressor, the larger diameter hose connection is the low side. Connect there, or look for the drier/accumulator (Large diameter silver container near the firewall). Connect there. You will need to access the AC information label under the hood to determine how much freon to add to the system.

Mar 12, 2016 | AC Cars & Trucks

2 Answers

Location of ac low pressure port location 2004 chevorlet avalanch


Look back on the firewall for the two a/c lines. One is large and on is much smaller. The larger line is the low pressure line. Follow that line back to the compressor. The low pressure port will be on that line.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Sep 01, 2012 | 2004 Chevrolet Avalanche

1 Answer

Engin light on 94 plymouth sundance


Check this procedure...
8_27_2012_5_04_55_pm.gif

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 27, 2012 | 1994 Plymouth Sundance

1 Answer

Where is the low side on the ac pump located?


There are two ports on the ac lines covered with black caps. One is larger than the other to help prevent you from connecting to the wrong port. One is low pressure and the other is high when the compressor is running.

Jul 02, 2012 | 1998 Plymouth Grand Voyager

1 Answer

Can i use R-134a to recharge my AC unit in my 94 plymouth voyager . And which is the low-port side?


yes,

Please see my tip at http://www.fixya.com/cars/r5833579-auto_truck_c_recharge . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Sep 26, 2010 | 1994 Plymouth Voyager

2 Answers

My 94 Sundance heater/AC blower motor has quit. I've bought a new resister, but cannot find where it's located. Any help?


The blower motor resistor is located in the same duct that the blower motor blows through. If you see the blower motor, within a foot of it is the resistor. The blower motor actually blows over the resistor to keep it cool. The blower motor is usually only in 1 of 2 different locations. On passenger side, access under the hood or under dash access behind glovebox. In both cases the resitor will be in the duct that the blower motor blows through.

Jun 16, 2010 | 1994 Plymouth Sundance

2 Answers

Where is the fuel filter


To the rear of the gas tank under the car.

Oct 20, 2009 | 1994 Plymouth Sundance

1 Answer

Where is the low pressure value located so i can add freon into the compressor


look at the ac compressor and follow the large ac line/hose untill u come to the service port,,has it been retofitted for 134a? if not go to parts store and ask for a retro fit foe the low side,u will need to remove the sharader valve before installing the low side retro fit,,also purchase a charge hose

Jul 05, 2009 | 1991 Mercury Cougar

1 Answer

1994 ford taurus body type 4s


go to auto zone and buy a 134 recharge kit follow the directions on the box, you will need to find to LOW side service port there are two ports with plastic caps on the ac lines you are looking for the one that is attached to a larger diameter ac line. the kit will ONLY FIT ON THIS FITTING so you dont have to worry, there is a label under the hood somewhere thats green and says how much 134a you should install be carefull wear safety googles and good luck, please rate -jeff

Jul 22, 2008 | 1994 Ford Taurus

Not finding what you are looking for?
1994 Plymouth Sundance Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...