Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 30, 2014

Change out key cylinder on a 1986 jeep cherokee

5 Related Answers

Anonymous

  • 51 Answers
  • Posted on Oct 08, 2008

SOURCE: 1998 jeep cherokee passenger window

Yes i believe they are interchangeable as long as they both have the same number of doors(2 door vs 4door)

Ad

Anonymous

  • 73 Answers
  • Posted on Jan 15, 2009

SOURCE: Where is slave cylinder on 1992 Jeep Cherokee?

Inside the Bell Housing, Behind the clutch.

Anonymous

  • 6982 Answers
  • Posted on Feb 26, 2009

SOURCE: 1986 jeep cj7 4 cylinder engine timing

As far as I know, timing is "fixed" and cannot be adjusted on that one. To verify see if your distributor has an integral holddown not a seperate piece as you would find on an adjustable one.

Anonymous

  • 29 Answers
  • Posted on Sep 28, 2009

SOURCE: 2001 Jeep Cherokee with 6 cylinder engine -- PO306 code cylinder

Plug, plug wire, plugged or open fuel injector. are the most likely.

Anonymous

  • 7353 Answers
  • Posted on Nov 06, 2009

SOURCE: Is there a diagram showing the location of the

Follow the line from the clutch master to the slave. Its within a 3 foot distance.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ask where is asd fuse located on 90 jeep cherkoee

old post and is key question on old jeeps
no engine stated. guess 4L
the ASD began 1990 to present.
the ANSWER IS BELOW.
the car did not have and ASD until your car was 100% Chrysler EFI. The goofy French EFI has none .
ASD and the 3 second rules and 6 to 8 failure classes to trip it.
none. some jeeps changed in 1993,


  • 1986 - Renix TBI available on Jeep 2.5 L four-cylinder engines.
  • 1987 - the new Renix controlled 4.0 L six-cylinder engine was rated at 173 hp (129 kW; 175 PS) and 220 lb·ft (298 N·m) of torque.
  • 1988 - 4.0 L output increased to 177 hp (132 kW; 179 PS) and 224 lb·ft (304 N·m) of torque, due to higher compression ratio. Renix still TBI
  • 1989 - Changed to Renix MPFI. (4 injectors now)
  • 1991 - Chrysler Corporation (then the owners of the Jeep brand replaced the Renix control system with OBD-I-compliant control electronics, the Chrysler HO EFI) with check engine light.(and flash codes)
0helpful
1answer

Lock cylinder backdoor jeep cherokee loredo 1992

see if you can take the door panel off from the inside and open manually and change the lock or call a lock smith
0helpful
1answer

How do I know if my ignition switch is bad on my 1995 jeep grand cherokee lerado 5.2 liter

The ignition switch does not usually go bad on Grand Cherokees but the ignition key cylinder does and it usually just stop turning, stuck in place. Key cylinder can be removed by taking the steering wheel off to access the little clip that's holding the key cylinder in place, inside the steering column.
2helpful
2answers

I've lost the keys to a '95 Jeep Grand Cherokee Orvis. Is there a solution other than changing out all the cylinders?

Yes, you can take your photo ID and your proof of registration to the dealer. They can cut new keys by looking up the key code for your vehicle.
1helpful
1answer

I lost my keys and there are two different keys to operate my jeep. One opens the door, and the other ones starts the car. Can I get a new set?

Sounds like somewhere along the life of your jeep someone changed the ignition cylinder, resulting in your having two separate keys. You will have to replace the ignition cylinder and all or maybe just the one driver's side door lock cylinder. There's really no way one key will work with both your existing ignition and door locks. Another suggestion is that you can get a complete matching set of locks and keys from someone who's parting out their Grand Cherokee, so you would then have only one key for all the locks.
0helpful
1answer

Need a diagram of the belt on 1986 jeep cherokee

Click on the following Link. It takes you directly to the Belt Diagrams for the 1986 Jeep Cherokee. There are several to choose from based on your size engine and options (AC/No AC, Power Steering..etc)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1986/make/jeep/model/cherokee/1986_jeep_cherokee_drive_belt_routing_diagram.htm
0helpful
1answer

Is there a diagram showing the location of the slave cylinder on a 1986 jeep cherokee / 2.5I4?

Follow the line from the clutch master to the slave. Its within a 3 foot distance.
Not finding what you are looking for?

69 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...