My high beams do not work when i turn them on, but the low beams remain on
SOURCE: Headlights Not Working, Brights and Turn Signals Work
This is cuased by the multifuntion switch that is located on the steering column. It is the swith with the headlight dimmers on it.
You just need to remove the steering column bezels and replace the multifunction switch.
SOURCE: No high beams, problem is not multifunction switch
Check the headlight switch to make sure that the connections or internal connections aren't corroded. This was a major problem for older fords, so it would be good to check it anyway.
SOURCE: 2003 dodge ram deisel change fcm no change.still
sounds like fuseblock underhood is faulty..front control module is on fuseblock
SOURCE: 02 dodge caravan headlights
SOUNDS LIKE INTEGRATED POWER MODULE(UNDERHOOD FUSEBLOCK)IS DEFECTIVE..ALSO CHECK FOR CORRODED TERMINALS IN CONNECTORS ON FUSEBLOCK..HAVE SEEN THIS BEFORE AND NEW FUSEBLOCK WAS NEEDED AND REPAIRED PROBLEM
SOURCE: Right headlight low beam does
I had the same problem with my 2004 ram, passenger side low-beam wouldn't work after replacement. Online I saw many things from socket replacement to Fcm replacement. What worked was to remove fcm (front control module) and clean appropriate contacts with small nail file . Repair took less than 1 hour and cost 0$, wish I could give credit where I found info.
302 views
Usually answered in minutes!
×