What would cause shaking only while pushing the gas pedal
Check ur map sensor and check on the ruber hose for any cracks or air leak
Tuneup or sensor
Mrs Amanda when you said on pushing the gas pedal is shaking do you mean the whilst accelerating with engine running ( reving) you do receive a shake? or when pushing the pedal you do feel on the pedal with engine off a shake? If it is the first check for any spark plug or spark plug HT Lead not working and cause the engine to shake. If is the second cause then check for your pedal connection cable etc.
SOURCE: loose gas pedal
the gas pedal is connected by a cable that goes to the throttle body or carburetor on the engine. there should be a nut that holds the cable end in place where the steel cable comes out of the housing near the throttle body. it sounds like this may be loose or stripped out. you may need to replace the entire throttle cable.
480 views
Usually answered in minutes!
After reaching the desired speed and you are cruising does the shaking stop?
the shaking has stopped its weird now when i turn to the left it clicks
Hi Mrs Amanda!
Hi Mrs Amanda ! according to what you said I just like to know when you said on turning to the left is clicking. Could you please focus on which side the front it clicks. I personaly believe that you will have depends the side Constant Velocity Joint worn and also I believe that your previous shake on acceleration most possible it was the CV JOINT whick might jumed into itself where the ball bearing is. Ask for a specialist advise.
×