You may not be avail to disable, actually let me re-frame that, when the light is on the system is disable, limp mode.
is hard to do with out a scanner, but if you have one, replace your brake switch, and reset the light. the brake switch controls the ASR/ BAS/ STABILITY CONTROL/ THE CRIUSE CONTROL. CHANGE IT WILL FIX YOUR CAR.
SOURCE: What does the BAS ASR light mean in a mercedes
brake light switch ,that's the part you need to replace to fix that BAS/ASR light. It's a $20 US part, a screwdriver, and 15 minutes to fix.
SOURCE: On a 1995 S500 Mercedes , ASR light keeps coming on
yes they can but unlikely-more likely a bad over voltage relay(powers up idle speed computer) or wire harness-your vehicle is probably a hfm type fuel injection they changed from lh that year. find out if it is lh check the fuses in the base module located in the passenger side of the engine compartment under a cover held in by 4mm allen head bolts-alot of times these control units have intermittent contact with there connectors. asr stands for acceleration slip regulation-both isc and asr communicate via can system to monitor throttle position- ea isc cc-idle speed cruise control and electronic actuater(throttle)-hopefully i have helped
SOURCE: How do I remove my 1997 Mercedes E320 factory radio
the radio should pull right out. use 2 picks to grab the sides and pull gently.
SOURCE: can't turn off EC on temperature control on a 1997
Press the O button to shut it off or any other button. Usually when the E/C sticks on its an A/C charge or sensor issue so check that also.
Testimonial: "Thanks....Will see if that works"
1,154 views
Usually answered in minutes!
×