The car has a 2.2 motor in it I need the torque specs. for the rod and main bearing caps
SOURCE: torque specs.
connecting rod = first pass 18 ft lbs , second pass 75 degrees
main bearings = first pass 37 ft lbs , second pass 77 degrees
wow that wasn't easy to find for some reason .
SOURCE: need torque specs 1988 Chevy silverado for main bearings and rod
Those values and most everything else you need for DIY work are contained in the Haynes manual for your vehicle.
We have one with each of our vehicles and not only give you the info needed to do repairs yourself but also get an idea of how much work a specific repair should (or shouldn't) cost.
'88 Chevy pickup manual
You can also buy these from auto parts stores for a few dollars less and sometimes on eBay for even less.
SOURCE: i need to know the torque specs for rod and main
MAIN BEARINGS BOLTS TORQUE 75 FT LBS ROD BEARINGS TORQUE 20 FT LBS + 70 DEGREES. CRANKSHAFT PULLEY DAMPER BOLT 70 FT LBS
SOURCE: ineed the torqu specs on a 1998 gmc jimmy
Hello rdt452428,
For the bearing cap bolts there are two methods.
The preferred method is two steps:
Step one, torque cap bolts to 15 ft.lbs.
Step tow tighten an additional 73 degrees.
The optional method is to torque all cap bolts to 77 ft.lbs.
For the connecting rod nuts its a two step process:
Step one, torque nuts to 20 ft.lbs.
Step two, tighten an additional 70 degrees.
The oil pump to the rear crankshaft bearing cap is torqued to 66 ft.lbs.
I hope this help.
Regards,
netvan
Testimonial: "your help was grat thank you ."
105 views
Usually answered in minutes!
×