Question about Plymouth Sundance

Open Question

Trolle body injection

It start but it looks like run out of fuel going to the trotle body

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1118 Answers

SOURCE: I HAVE 1988 FUEL INJECTED 5.7 BLAZER

Chk. the egr valve for vacume and if it is functioning, might be pluged up with carbon deposits.

Posted on Feb 14, 2009

Ad
Molson02536

Harvey N Tawatao

  • 3854 Answers

SOURCE: 1995 chevy 1500 4.3. motor turns over but no start?

It could, if the fuel pressure is less then 60psi. Check the fuel pressure at te shredder valve, there should be 60 to 65psi to have the fuel injectors to work. If there is less then that, then it's a good chance that the fuel pump is going to have to be replaced and the fuel filter. To keep it simple, replace the fuel filter first and see if that get's the engine running. The other thing to that would cause this is a bad ignition control module (ICM) and that is located at the distributor. Good luck and keep me posted, be glad to help you get your jimmy running 100% again. 

Posted on Jul 22, 2009

Anonymous

  • 59 Answers

SOURCE: 5.7 chevrolet 1998 injectors wil not open,what's

You could possibly have to replace the spider injection assembly. Or the regulator unit to the spider injection rail.

Posted on Aug 12, 2009

ftw1952

frank thomas wilson

  • 10319 Answers

SOURCE: 1988 chevy will not run,fuel injecter will not

turn the ignition to the on position without starting the engine. you should hear the fuel pump running for 5 seconds inside the fuel tank. if not heard replace the engines oil switch. that starts the pumps circuit when the key is turned on. after the engine builds up its normal oil pressure the computer shuts that oil switches circuit off and turns on the fuel pump relay

Posted on May 15, 2010

ourhowse

Dar

  • 2007 Answers

SOURCE: My 1987 2.9 v6.

Change MAF. Mass air flow sensor. Best place for something that old is probably an auto wrecker.

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean the trotle body


go buy a can of throttle body cleaner

Jan 13, 2017 | Cars & Trucks

1 Answer

I clean my trotle body on my Altima 2003 and it's going up and down the trotle has to replace or how canfix somebody help me please


Did you disconnect the battery negative cable for 5 minutes after the cleaning to reset the idle control system, if not do that.

Jun 14, 2012 | 2000 Nissan Altima

1 Answer

I have a 1992 camaro RS 305 with 5 speed. It will turn over but won't start, if you pour gas in throttle body it will fire right up and run like it should. I put in new fuel pump, new ECU, new TPS, still...


If you turn the key to the on position and you hear the fuel pump run, does it run for longer then 5 seconds? If so then you are going to need to look at your fuel filter, if it stays running then you are going to need to look at your fuel regulator. You can also go to Auto Zone and buy a fuel pressure test kit or rent one, and check your fuel pressure on the fuel rails. Check for spark also, if you are low on spark then you are not going to fire, unless you dump more fuel then you need to into the throttle body.

Nov 07, 2010 | 1992 Chevrolet Camaro

1 Answer

I replaed the fuel pump on my 1995 jeep now. it will not run it just starts and dies


Check fuel pump again or replace old one if it run with it to see if it's the new that's not working probably if so buy another fuel pump from junkyard not new or eBay. Check/change fuel filter. Check spark plugs/ air intake Also clean the trotle with that carburetor choke cleaner sensor next to it. Injectors also.

Oct 31, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Hi i have a 06 accent that will start and tick over but when you go to take off it looses power and chucks and cuts out and might take a half hour befor it will start up again , no engine warning light and...


Check the fuel pressure, fuel pump (which is inside the fuel tank), fuel pressure solenoid (if fitted) and fuel pressure regulator (if fitted). Check and replace the fuel filter and check the injector flow rates in case you have clogged or faulty injectors.. I would lean towards a fuel supply issue here so look at the fuel filter and fuel pump first..

Jan 14, 2010 | 2006 Hyundai Accent

1 Answer

1995 chevy 1500 4.3. motor turns over but no start?


It could, if the fuel pressure is less then 60psi. Check the fuel pressure at te shredder valve, there should be 60 to 65psi to have the fuel injectors to work. If there is less then that, then it's a good chance that the fuel pump is going to have to be replaced and the fuel filter. To keep it simple, replace the fuel filter first and see if that get's the engine running. The other thing to that would cause this is a bad ignition control module (ICM) and that is located at the distributor. Good luck and keep me posted, be glad to help you get your jimmy running 100% again. 

Jul 22, 2009 | 1995 Chevrolet Blazer

7 Answers

Car starts, but won't stay running


My car starts up but then dies in just a few sec

Jul 20, 2009 | 1994 Honda Accord

1 Answer

My idle goes own when i start my air conditioning system at park.....and the car finish by stall..... whats the problemÉ


hey bud this should take care of your problen but you have to follow exactle and as I say it is very easy to do first you are going to remove your battery terminal and clean your trotle body also change the filters and after doing this you will have to run the truck for about an half hour just drive it around so the computer can reset the pcm and also let the truck know that it should keep trotle when idle i see this all the time so you should have no problem as long as you do this keep in mind this is not a hard job the throtle body is located to the left under the hood and is cover by a black cover just remove the screw and you are good to go start cleaning if you need more help just google it and you might be able to get direction with picture there

Aug 07, 2008 | 2003 GMC Envoy Xl

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...