Why does 1998 acura cl rear brake caliper keep seizing up?

SOURCE: Find oil filter in engine of acura CL

back side of block under intake if its a 2.2 or a 2.3 if its a 3.0 its on the passenger side of engine bay if you turn the wheel you will be looking at it

SOURCE: Lost code for my 1998 acura cl

You have to call the dealer and give them your vin# they tell You P.S. DO NOT TRY AND PUT IN A CODE THREE STRIKES AND YOU OUT. BUT I CAN FIX THAT TOO ONCE YOU GET YOUR CODE . I hope that helped.

SOURCE: 1998 Acura CL Radio Code need...

You Would have to get in Contact with the dealer and ask them for the information with the same you provided here they can help if its just the code there should not be a charge but every dealer is different. If you feel you can also call acura main number @Acura Toll free: 800-382-2238. Fax: 310-783-3535. Website: www.acura.com. I hoped that helped.

SOURCE: how to install a clutch on acura CL

Plenty to mention. Best way is to get the Hanyes Repair manual-sold for around $20, with plenty of stuff in it. A few things:
Disconnect battery.
Take off starter-motor.
Remove brake calipers, and tie them to struts.
Remove front tires.
Disconnect clutch master-cylinder
Jack up the car and support it on jack-stands.
Unbolt the clutch-housing from the engine, drag it out.
Installation is reverse of removal.

Testimonial: "Thanks! This should help"

SOURCE: I have a 1998 Acura 3.0 cl and the brake lights

Check all fuses first. If they are good, go under dash and check brake switch. Remove electrical connector, Attach ohmmeter to both terminals. Should have infinite resistance. Depress plunger. Should have no resistance. If you have trouble with the meter, buy one that beeps when there is continuity