I dont know how to reset the odomiter trip meter or know if theres one on this jeep

Depends on the model but looking at the dials, the left one might have a plastic button protruding from the glass with trip marked! Press and hold till the trip resets to 0!

read the operators manual

not enough info

you dont because tht is illegle

lol, push the button and hold it in for a second

i had that problem before i turned the key to on and pressed the odomiter button twice and held it down it started to run through the codes and havent had a problem with it since.

Try this. I can't promise this will work though. Make sure the trip meter on the speedometer is set to the odometer. Turn the key off. Push and hold the trip reset button on the speedometer and turn the key on. Hold the button until the light goes out. This works with a lot of cars so maybe it will work on yours. Let me know something.

Try this. I can't promise this will work though. Make sure the trip meter on the speedometer is set to the odometer. Turn the key off. Push and hold the trip reset button on the speedometer and turn the key on. Hold the button until the light goes out. This works with a lot of cars so maybe it will work on yours. Let me know something.

Press the info button until you see Trip A or Trip B. Once you are looking at the Trip meter you want to reset, press and HOLD the info button. After 3 seconds, the dashboard will beep and the Trip meter will reset to zero.

I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON; do not start the car.

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps!