SOURCE: 2005 INFINITY QX56
There is an info button. Press that button repeatedly until you get to maintenence. Once there, use the directional knob and toggle down to oil and press ok, from there it should either give you a reset tab to highlight and press ok, or highlight the mileage bar and toggle left until it is back at 0. If you have any trouble let me know and I will walk you through it.
SOURCE: Shifting Problem
I believe you have to use the shift release button to shift out of park and back into park. This is a safety feature to prevent accidental shifting of the selector while the car is stationary
SOURCE: my back brakes are making noise, what type of
Try your parts store for this one. They have a wide range of different brake pads for your vehicle with prices going up for the better ones.
I use Wagner on my 1997 Cadillac deville that do not require shims as they are built in.
These are fool proof pads.
Good luck to you...
SOURCE: 2004 infinity qx56 it accelaratets when shifting down
Check under Automobile.com site for product safety conditions. The NHTSA will show complaints and resolutions on this site. The technical service bulletins are numbered. If, after you enter all the info about your problem and compare it to past reports, you can get the number of the Resolution to the Dealer. Use every bit of ID the site shows for the solution.
Many times it shows if this is a free repair. You can also REPORT a problem to the NHTSA for investigation.
This can be catagorized under unintended or runaway acceleration. It may be listed under Engine, Controls, or under which part is causing the problem.
In general, it is odd to pickup speed while downshifting. The lower gears would cause the engine to rev up without making the car move faster. If this happens only when the Cruise control is being used, discontinue using the cruise. It is the only part that will open the throttle to maintain speed.
144 views
Usually answered in minutes!
×