Where is the knock sensor located
Depending on the year, you can one or two of them. Newer models have two. One on each side of the block, located about in the center of the block. Older ones stick out a bit and are about the size of a silver dollar. Newer ones have a bolt that goes thru the center of them with some wires attached. Be careful, the older ones mount into a water jacket. Antifreeze will come out.
SOURCE: 1986 jetta oil pump location and replacement/knock sensor
oil pump is in the oil pan and if you have no or low oil pressure replace pump before doing anything with knock sensor. knock sensor is more or less a microphone and listens for spark knock but will set codes for any knocking or tapping noise which is commonly heard if oil pump is malfunctioning
SOURCE: 2001 hyundai elantra knock sensor
yes sir, the knock sensor is located on the side of the engine block, the side closest to the firewall. it is just a small circular object with a wire connector and one bolt
SOURCE: need to replace knock sensor/ O2 sensor 04 kia rio
IT IS IN THE SIDE OF THE ENGINE BLOCK, SCREWED INTO THE WATER JACKET OF THE BLOCK
SOURCE: need to know where knock sensor is located on a 2001 kia rio.
At center rear of engine compartment, by intake manifold support bracket.
35 views
Usually answered in minutes!
×