Airbag light won't go off
SOURCE: 2005 crown victoria airbag light
First you should check the plug in connections under both seats if they are pluged in then check crash sensor on front bumper behind grill good luck
SOURCE: '96 ford Crown Victoria....No hazard or brake light no turn sigal
Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
SOURCE: serpentine belt replacement for 1996 ford crown
heres a site that will help you
http://images.google.co.uk/imgres?imgurl=http://www.p71interceptor.com/steering/pumps/removereinstall/00fsmbeltroute.jpg&imgrefurl=http://www.p71interceptor.com/steering/pumps/removereinstall/&usg=__dHtG-6MoZ_Rzzl1-7eJNXrZWqV8=&h=477&w=640&sz=69&hl=en&start=2&itbs=1&tbnid=IeMDMepoicFAeM:&tbnh=102&tbnw=137&prev=/images%3Fq%3Dserpentine%2Bbelt%2Bdiagram%2Bfor%2Bford%2Bcrown%2Bvictoria%2B1996%26gbv%3D2%26hl%3Den%26sa%3DG
just click on that and it is there hope this helps
SOURCE: schematic diagram for a ford crown victoria 1996
Fig.: 1995-97 4.6L engine schematic
Hope this help (remember rated this post).
SOURCE: I have a 1996 ford crown victoria and it won't
Check motor to body ground strap, battery to motor and battery to body ground for corrosion under mounting bolts. Bad ground can cause all kinds of electrical problems. Also your starter or soloinoid could be shorting out.
170 views
Usually answered in minutes!
×